[PATCH v4 2/2] arm64: dts: qcom: glymur-crd: Enable eDP display support

[Abel Vesa]

From: Abel Vesa <abel.vesa@xxxxxxxxxx>

Enable the MDSS (Mobile Display SubSystem) along with the 3rd
DisplayPort controller and its PHY in order to bring support
for the panel on Glymur CRD platform. Also describe the voltage
regulator needed by the eDP panel.

Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/glymur-crd.dts | 71 +++++++++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dts b/arch/arm64/boot/dts/qcom/glymur-crd.dts
index a7b30accbd1e..38cdcf662ba7 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dts
@@ -123,6 +123,22 @@ pmic_glink_ss_in1: endpoint {
 		};
 	};
 
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
 	vreg_nvme: regulator-nvme {
 		compatible = "regulator-fixed";
 
@@ -460,6 +476,47 @@ ptn3222_1: redriver@47 {
 	};
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "samsung,atna60cl08", "samsung,atna33xc20";
+			enable-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+			power-supply = <&vreg_edp_3p3>;
+
+			pinctrl-0 = <&edp_bl_en>;
+			pinctrl-names = "default";
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l2f_e1_0p83>;
+	vdda-pll-supply = <&vreg_l4f_e1_1p08>;
+
+	status = "okay";
+};
+
 &pcie3b {
 	vddpe-3v3-supply = <&vreg_nvmesec>;
 
@@ -593,6 +650,20 @@ &tlmm {
 			       <10 2>, /* OOB UART */
 			       <44 4>; /* Security SPI (TPM) */
 
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
 	pcie4_default: pcie4-default-state {
 		clkreq-n-pins {
 			pins = "gpio147";

-- 
2.48.1