[PATCH 1/2] regulator: pca9450: Correct interrupt type

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@xxxxxxx>

Kernel warning on i.MX8MP-EVK when doing module test:
irq: type mismatch, failed to map hwirq-3 for gpio@30200000!

Per PCA945[X] specification: The IRQ_B pin is pulled low when any unmasked
interrupt bit status is changed and it is released high once application
processor read INT1 register.

So the interrupt should be configured as IRQF_TRIGGER_LOW, not
IRQF_TRIGGER_FALLING.

Fixes: 0935ff5f1f0a4 ("regulator: pca9450: add pca9450 pmic driver")
Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
 drivers/regulator/pca9450-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 5fa8682642505ab01736a9fb1ef8761d77ef6b2d..2205f6de37e7d4eb8a0abf7deebf319395a2bc75 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -1369,7 +1369,7 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
 	if (pca9450->irq) {
 		ret = devm_request_threaded_irq(pca9450->dev, pca9450->irq, NULL,
 						pca9450_irq_handler,
-						(IRQF_TRIGGER_FALLING | IRQF_ONESHOT),
+						(IRQF_TRIGGER_LOW | IRQF_ONESHOT),
 						"pca9450-irq", pca9450);
 		if (ret != 0)
 			return dev_err_probe(pca9450->dev, ret, "Failed to request IRQ: %d\n",

-- 
2.37.1