[PATCH 1/3] dt-bindings: power: Add power-domains-child-ids property

[Kevin Hilman (TI)]

Add binding documentation for the new power-domains-child-ids property,
which works in conjunction with the existing power-domains property to
establish parent-child relationships between a multi-domain power domain
provider and external parent domains.

Each element in the uint32 array identifies the child domain
ID (index) within the provider that should be made a child domain of
the corresponding phandle entry in power-domains. The two arrays must
have the same number of elements.

Signed-off-by: Kevin Hilman (TI) <khilman@xxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/power/power-domain.yaml | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml
index b1147dbf2e73..a3d2af124d37 100644
--- a/Documentation/devicetree/bindings/power/power-domain.yaml
+++ b/Documentation/devicetree/bindings/power/power-domain.yaml
@@ -68,6 +68,21 @@ properties:
       by the given provider should be subdomains of the domain specified
       by this binding.
 
+  power-domains-child-ids:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      An array of child domain IDs that correspond to the power-domains
+      property. This property is only applicable to power domain providers
+      with "#power-domain-cells" > 0 (i.e., providers that supply multiple
+      power domains). It specifies which of the provider's child domains
+      should be associated with each parent domain listed in the power-domains
+      property. The number of elements in this array must match the number of
+      phandles in the power-domains property. Each element specifies the child
+      domain ID (index) that should be made a child domain of the corresponding
+      parent domain. This enables hierarchical power domain structures where
+      different child domains from the same provider can have different
+      parent domains.
+
 required:
   - "#power-domain-cells"
 
@@ -133,3 +148,23 @@ examples:
             min-residency-us = <7000>;
         };
     };
+
+  - |
+    // Example: SCMI domain 15 -> MAIN_PD, SCMI domain 19 -> WKUP_PD
+    MAIN_PD: power-controller-main {
+        compatible = "foo,power-controller";
+        #power-domain-cells = <0>;
+    };
+
+    WKUP_PD: power-controller-wkup {
+        compatible = "foo,power-controller";
+        #power-domain-cells = <0>;
+    };
+
+    scmi_pds: protocol@11 {
+        compatible = "foo,power-controller";
+        reg = <0x11>;
+        #power-domain-cells = <1>;
+        power-domains = <&MAIN_PD>, <&WKUP_PD>;
+        power-domains-child-ids = <15>, <19>;
+    };

-- 
2.51.0