Re: [PATCH] VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x1003: mbim, diag，adb，at

[Greg KH]

On Wed, Mar 11, 2026 at 07:26:34PM +0800, zwq2226404116@xxxxxxx wrote:
> From: "wanquan.zhong" <wanquan.zhong@xxxxxxxxxxx>
> 
> T:  Bus=03 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 12 Spd=480  MxCh= 0
> D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> P:  Vendor=33f8 ProdID=1003 Rev= 5.15
> S:  Manufacturer=Rolling Wireless S.a.r.l.
> S:  Product=Rolling RW135R-GL Module
> S:  SerialNumber=12345678
> C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
> A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
> I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
> E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
> I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
> I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
> E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
> E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
> E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> 
> Signed-off-by: wanquan.zhong <wanquan.zhong@xxxxxxxxxxx>
> ---
>  drivers/usb/serial/option.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index e349ed66d2ac..abeeb7c66977 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -2449,6 +2449,9 @@ static const struct usb_device_id option_ids[] = {
>  	  .driver_info = RSVD(4) | RSVD(5) },
>  	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0115, 0xff),			/* Rolling RW135-GL (laptop MBIM) */
>  	  .driver_info = RSVD(5) },
> +	/* Rolling RW135R-GL (laptop MBIM) */
> +	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x1003, 0xff),
> +	  .driver_info = RSVD(5) },
>  	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a2, 0xff) },			/* Rolling RW101-GL (laptop MBIM) */
>  	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a3, 0xff) },			/* Rolling RW101-GL (laptop MBIM) */
>  	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a4, 0xff),			/* Rolling RW101-GL (laptop MBIM) */
> -- 
> 2.43.0
> 

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- You did not specify a description of why the patch is needed, or
  possibly, any description at all, in the email body.  Please read the
  section entitled "The canonical patch format" in the kernel file,
  Documentation/process/submitting-patches.rst for what is needed in
  order to properly describe the change.

- You did not write a descriptive Subject: for the patch, allowing Greg,
  and everyone else, to know what this patch is all about.  Please read
  the section entitled "The canonical patch format" in the kernel file,
  Documentation/process/submitting-patches.rst for what a proper
  Subject: line should look like.

- It looks like you did not use your "real" name for the patch on either
  the Signed-off-by: line, or the From: line (both of which have to
  match).  Please read the kernel file,
  Documentation/process/submitting-patches.rst for how to do this
  correctly.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot