[PATCH 2/4] gpio: kempld: Add support for PLD version >= 2.8

[Alban Bedel]

Starting with version 2.8 there is a dedicated register to configure
the output level. Read the PLD version in the probe and select the
correct register to use for the set operations.

Signed-off-by: Alban Bedel <alban.bedel@xxxxxxxxxx>
---
 drivers/gpio/gpio-kempld.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-kempld.c b/drivers/gpio/gpio-kempld.c
index 532e4000879ab..2263de77d40e9 100644
--- a/drivers/gpio/gpio-kempld.c
+++ b/drivers/gpio/gpio-kempld.c
@@ -25,6 +25,7 @@
 struct kempld_gpio_data {
 	struct gpio_chip		chip;
 	struct kempld_device_data	*pld;
+	u8				out_lvl_reg;
 };
 
 /*
@@ -71,7 +72,7 @@ static int kempld_gpio_set(struct gpio_chip *chip, unsigned int offset,
 	struct kempld_device_data *pld = gpio->pld;
 
 	kempld_get_mutex(pld);
-	kempld_gpio_bitop(pld, KEMPLD_GPIO_LVL, offset, value);
+	kempld_gpio_bitop(pld, gpio->out_lvl_reg, offset, value);
 	kempld_release_mutex(pld);
 
 	return 0;
@@ -96,7 +97,7 @@ static int kempld_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
 	struct kempld_device_data *pld = gpio->pld;
 
 	kempld_get_mutex(pld);
-	kempld_gpio_bitop(pld, KEMPLD_GPIO_LVL, offset, value);
+	kempld_gpio_bitop(pld, gpio->out_lvl_reg, offset, value);
 	kempld_gpio_bitop(pld, KEMPLD_GPIO_DIR, offset, 1);
 	kempld_release_mutex(pld);
 
@@ -153,6 +154,15 @@ static int kempld_gpio_probe(struct platform_device *pdev)
 	if (!gpio)
 		return -ENOMEM;
 
+	/* Starting with version 2.8 there is a dedicated register for the
+	 * output state, earlier versions share the register used to read
+	 * the line level.
+	 */
+	if (pld->info.spec_major > 2 || pld->info.spec_minor >= 8)
+		gpio->out_lvl_reg = KEMPLD_GPIO_OUT_LVL;
+	else
+		gpio->out_lvl_reg = KEMPLD_GPIO_LVL;
+
 	gpio->pld = pld;
 
 	platform_set_drvdata(pdev, gpio);
-- 
2.39.5