[PATCH v2 03/11] clk: qcom: gcc-sc8180x: Use retention for USB power domains

[Val Packett]

The USB subsystem does not expect to lose its state on suspend:

    xhci-hcd xhci-hcd.0.auto: xHC error in resume, USBSTS 0x401, Reinit
    usb usb1: root hub lost power or was reset

(The reinitialization usually succeeds, but it does slow down resume.)

To maintain state during suspend, the relevant GDSCs need to stay in
retention mode, like they do on other similar SoCs. Change the mode to
PWRSTS_RET_ON to fix.

Fixes: 4433594bbe5d ("clk: qcom: gcc: Add global clock controller driver for SC8180x")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Signed-off-by: Val Packett <val@xxxxxxxxxxxx>
---
 drivers/clk/qcom/gcc-sc8180x.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sc8180x.c b/drivers/clk/qcom/gcc-sc8180x.c
index 55dabf6259b2..b116a9c0b2d9 100644
--- a/drivers/clk/qcom/gcc-sc8180x.c
+++ b/drivers/clk/qcom/gcc-sc8180x.c
@@ -4172,7 +4172,7 @@ static struct gdsc usb30_sec_gdsc = {
 	.pd = {
 		.name = "usb30_sec_gdsc",
 	},
-	.pwrsts = PWRSTS_OFF_ON,
+	.pwrsts = PWRSTS_RET_ON,
 	.flags = POLL_CFG_GDSCR,
 };
 
@@ -4190,7 +4190,7 @@ static struct gdsc usb30_prim_gdsc = {
 	.pd = {
 		.name = "usb30_prim_gdsc",
 	},
-	.pwrsts = PWRSTS_OFF_ON,
+	.pwrsts = PWRSTS_RET_ON,
 	.flags = POLL_CFG_GDSCR,
 };
 
@@ -4262,7 +4262,7 @@ static struct gdsc usb30_mp_gdsc = {
 	.pd = {
 		.name = "usb30_mp_gdsc",
 	},
-	.pwrsts = PWRSTS_OFF_ON,
+	.pwrsts = PWRSTS_RET_ON,
 	.flags = POLL_CFG_GDSCR,
 };
 
-- 
2.52.0