[PATCH v2 1/3] arm64: dts: imx8mm: Explicitly set DSI_PHY_REF clock as a child of CLK_24M

[Alexander Stein]

Since commits a0deedcc0cf0 ("arm64: dts: imx8mm: Slow default video_pll1
clock rate") and 5fe6ec93f10b0 ("clk: imx8mm: Let IMX8MM_CLK_LCDIF_PIXEL
set parent rate") VIDEO_PLL1 is dynamically programmed by CLK_LCDIF_PIXEL.
On imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtso this results in a
VIDEO_PLL1 frequency of 68.2 MHz and DSI_PHY_REF of 17.05MHz (1/4).
Instead use the 24 MHz clock as parent for DSI PHY reference clock.

Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
---
Changes in v2:
* None

 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index f2e1854f38a0a..eb23ca27e8597 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -1149,8 +1149,10 @@ mipi_dsi: dsi@32e10000 {
 				clocks = <&clk IMX8MM_CLK_DSI_CORE>,
 					 <&clk IMX8MM_CLK_DSI_PHY_REF>;
 				clock-names = "bus_clk", "sclk_mipi";
-				assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>;
+				assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>,
+						  <&clk IMX8MM_CLK_DSI_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
+							 <&clk IMX8MM_CLK_24M>;
 				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>;
 				status = "disabled";
-- 
2.43.0