[PATCH v4 02/10] arm64: dts: realtek: Add clock support for RTD1625

[Yu-Chun Lin]

Add the clock controller nodes and osc27m fixed clock for the
Realtek RTD1625 SoC.

Signed-off-by: Yu-Chun Lin <eleanor.lin@xxxxxxxxxxx>
---
Changes in v4:
- This is a new patch.
---
 arch/arm64/boot/dts/realtek/kent.dtsi | 30 +++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/realtek/kent.dtsi b/arch/arm64/boot/dts/realtek/kent.dtsi
index ae006ce24420..eaff586c1806 100644
--- a/arch/arm64/boot/dts/realtek/kent.dtsi
+++ b/arch/arm64/boot/dts/realtek/kent.dtsi
@@ -26,6 +26,15 @@ timer {
 			     <GIC_PPI  9 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	clocks {
+		osc27m: osc {
+			compatible = "fixed-clock";
+			clock-frequency = <27000000>;
+			clock-output-names = "osc27m";
+			#clock-cells = <0>;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -141,6 +150,20 @@ rbus: bus@98000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 
+			cc: clock-controller@0 {
+				compatible = "realtek,rtd1625-crt-clk";
+				reg = <0x0 0x900>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			ic: clock-controller@7088 {
+				compatible = "realtek,rtd1625-iso-clk";
+				reg = <0x7088 0x8>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
 			uart0: serial@7800 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x7800 0x100>;
@@ -150,6 +173,13 @@ uart0: serial@7800 {
 				reg-shift = <2>;
 				status = "disabled";
 			};
+
+			iso_s_cc: clock-controller@146310 {
+				compatible = "realtek,rtd1625-iso-s-clk";
+				reg = <0x146310 0x8>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
 		};
 
 		gic: interrupt-controller@ff100000 {
-- 
2.34.1