Re: [PATCH v2 1/2] dt-bindings: display: bridge: ti, sn65dsi83: Add dual-link video mode property

[Krzysztof Kozlowski]

On Thu, Mar 12, 2026 at 04:46:40PM +0100, Luca Ceresoli wrote:
> Hello Sudarshan,
> 
> On Thu Mar 12, 2026 at 5:37 AM CET, Sudarshan Shetty wrote:
> > Add a new optional device tree property `ti,dual-link-video-mode`
> > to indicate that the bridge should configure the device for
> > dual-link LVDS video mode.
> >
> > In dual-link configurations, some panels require the horizontal
> > timing parameters to be adjusted before programming them into
> > the device. In such cases, the horizontal timing values must be
> > divided by two when operating in dual-link mode.
> >
> > Signed-off-by: Sudarshan Shetty <tessolveupstream@xxxxxxxxx>
> 
> This is not needed. Dual link mode is already implied by the presence of
> port@2 and port@3.

Yep!

Thanks for chiming in.

Best regards,
Krzysztof