Re: [PATCH 2/4] dt-bindings: i2c: qcom-cci: Document Milos compatible

[Luca Weiss]

On Fri Feb 13, 2026 at 2:16 PM CET, Luca Weiss wrote:
> Hi all,
>
> On Tue Jan 20, 2026 at 2:18 PM CET, Konrad Dybcio wrote:
>> On 1/17/26 12:54 PM, Krzysztof Kozlowski wrote:
>>> On Fri, Jan 16, 2026 at 02:38:56PM +0100, Luca Weiss wrote:
>>>> Add Milos compatible for the CAMSS CCI interfaces.
>>>>
>>>> Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
>>>> ---
>>>>  .../devicetree/bindings/i2c/qcom,i2c-cci.yaml          | 18 ++++++++++++++++++
>>>>  1 file changed, 18 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
>>>> index a3fe1eea6aec..c57d81258fba 100644
>>>> --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
>>>> +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
>>>> @@ -27,6 +27,7 @@ properties:
>>>>        - items:
>>>>            - enum:
>>>>                - qcom,kaanapali-cci
>>>> +              - qcom,milos-cci
>>>>                - qcom,qcm2290-cci
>>>>                - qcom,sa8775p-cci
>>>>                - qcom,sc7280-cci
>>>> @@ -263,6 +264,23 @@ allOf:
>>>>              - const: cpas_ahb
>>>>              - const: cci
>>>>  
>>>> +  - if:
>>>> +      properties:
>>>> +        compatible:
>>>> +          contains:
>>>> +            enum:
>>>> +              - qcom,milos-cci
>>>> +    then:
>>>> +      properties:
>>>> +        clocks:
>>>> +          minItems: 3
>>>> +          maxItems: 3
>>>> +        clock-names:
>>>> +          items:
>>>> +            - const: soc_ahb
>>>> +            - const: cpas_ahb
>>>> +            - const: cci
>>> 
>>> Same comments as other discussion these days - I guess that soc_ahb
>>> serves the same purpose as camnoc_axi, so this is just last entri in the
>>> if:then: blocks.
>>> 
>>> I really find this binding terrible - around six names for AHB - so I do
>>> not want another combination...
>>
>> I dug up the CCI doc, it talks about the CCI having a CC_CCI_CLK clock ("cci"
>> here) and a CC_PBUS_CLK (AHB interface to the rest of the SoC).
>>
>> The CAMSS TOP doc (for Milos specifically, but I would assume there's a
>> pattern) says that for access to CCI_0, I need to enable CAM_CC_CPAS_AHB_CLK
>> and CAM_CC_CCI_0_CLK. CPAS is a wrapper inside CAMSS that contains most of
>> the programmable IPs on there (notably not the CSIPHYs, at least not on this
>> platform)
>>
>> It further mentions that GCC_SOC_AHB_CLK is required for *any* register
>> access within CAMSS. Perhaps it sits right in front of the xNoC-to-CAMNoC
>> interface.
>>
>> This only enforces my imagination of CAMSS being a fully contained "bus"
>> (perhaps somewhat like AxNOC on 8996 represented with a simple-pm-bus)..
>>
>> +Dmitry, myself and a number of our colleagues were deliberating how to
>> best represent the hardware going forward and I think we at some point waved
>> the idea of putting every camera subdevice under a "camss: bus@ {}"-type node,
>> which would hold the reference to the TITAN_TOP_GDSC. This seems fitting for
>> housing the SOC_AHB clock as well and therefore concluding this discussion.
>
> How can we continue here? What change can I do to unblock this? I can't
> tell whether soc_ahb == camnoc_axi for this platform so I need some help
> here.

Any feedback on this?

Regards
Luca