Re: [PATCH] usb: typec: ucsi: Add UCSI_USB4_IMPLIES_USB quirk for X1E80100

[Heikki Krogerus]

Thu, Mar 12, 2026 at 03:44:31PM +0530, Krishna Kurapati kirjoitti:
> On X1E80100, when we connect a USB4 capable dock, the PARTNER_FLAGS
> indicate USB4_GEN3 being set whilst keeping the PARTNER_FLAGS_USB
> cleared. Due to this, during ucsi_partner_change call, the usb role
> is marked as ROLE_NONE and passed to DWC3 controller the same way.
> 
> Fix this by adding UCSI_USB4_IMPLIES_USB quirk and check for it to
> decide and pass on proper ROLE information to DWC3 layer.
> 
> Signed-off-by: Krishna Kurapati <krishna.kurapati@xxxxxxxxxxxxxxxx>

Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>

> ---
>  drivers/usb/typec/ucsi/ucsi.c       | 6 ++++--
>  drivers/usb/typec/ucsi/ucsi.h       | 3 +++
>  drivers/usb/typec/ucsi/ucsi_glink.c | 2 ++
>  3 files changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
> index f38a4d7ebc42..e042499613c9 100644
> --- a/drivers/usb/typec/ucsi/ucsi.c
> +++ b/drivers/usb/typec/ucsi/ucsi.c
> @@ -1182,8 +1182,10 @@ static void ucsi_partner_change(struct ucsi_connector *con)
>  		}
>  	}
>  
> -	/* Only notify USB controller if partner supports USB data */
> -	if (!(UCSI_CONSTAT(con, PARTNER_FLAG_USB)))
> +	if ((!UCSI_CONSTAT(con, PARTNER_FLAG_USB)) &&
> +	    ((con->ucsi->quirks & UCSI_USB4_IMPLIES_USB) &&
> +	     (!(UCSI_CONSTAT(con, PARTNER_FLAG_USB4_GEN3) ||
> +		UCSI_CONSTAT(con, PARTNER_FLAG_USB4_GEN4)))))
>  		u_role = USB_ROLE_NONE;
>  
>  	ret = usb_role_switch_set_role(con->usb_role_sw, u_role);
> diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
> index 43a0d01ade8f..cff9ddc2ae21 100644
> --- a/drivers/usb/typec/ucsi/ucsi.h
> +++ b/drivers/usb/typec/ucsi/ucsi.h
> @@ -497,6 +497,9 @@ struct ucsi {
>  	unsigned long quirks;
>  #define UCSI_NO_PARTNER_PDOS	BIT(0)	/* Don't read partner's PDOs */
>  #define UCSI_DELAY_DEVICE_PDOS	BIT(1)	/* Reading PDOs fails until the parter is in PD mode */
> +
> +/* USB4 connection can imply that USB communcation is supported */
> +#define UCSI_USB4_IMPLIES_USB	BIT(2)
>  };
>  
>  #define UCSI_MAX_DATA_LENGTH(u) (((u)->version < UCSI_VERSION_2_0) ? 0x10 : 0xff)
> diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c
> index 11b3e24e34e2..1cb519cc0532 100644
> --- a/drivers/usb/typec/ucsi/ucsi_glink.c
> +++ b/drivers/usb/typec/ucsi/ucsi_glink.c
> @@ -371,6 +371,7 @@ static void pmic_glink_ucsi_destroy(void *data)
>  static unsigned long quirk_sc8180x = UCSI_NO_PARTNER_PDOS;
>  static unsigned long quirk_sc8280xp = UCSI_NO_PARTNER_PDOS | UCSI_DELAY_DEVICE_PDOS;
>  static unsigned long quirk_sm8450 = UCSI_DELAY_DEVICE_PDOS;
> +static unsigned long quirk_x1e80100 = UCSI_DELAY_DEVICE_PDOS | UCSI_USB4_IMPLIES_USB;
>  
>  static const struct of_device_id pmic_glink_ucsi_of_quirks[] = {
>  	{ .compatible = "qcom,qcm6490-pmic-glink", .data = &quirk_sc8280xp, },
> @@ -379,6 +380,7 @@ static const struct of_device_id pmic_glink_ucsi_of_quirks[] = {
>  	{ .compatible = "qcom,sm8350-pmic-glink", .data = &quirk_sc8180x, },
>  	{ .compatible = "qcom,sm8450-pmic-glink", .data = &quirk_sm8450, },
>  	{ .compatible = "qcom,sm8550-pmic-glink", .data = &quirk_sm8450, },
> +	{ .compatible = "qcom,x1e80100-pmic-glink", .data = &quirk_x1e80100, },
>  	{}
>  };
>  
> -- 
> 2.34.1

-- 
heikki