Re: [PATCH net-next v7 2/5] net: stmmac: Add DW25GMAC support in stmmac core driver

[Russell King (Oracle)]

On Fri, Mar 13, 2026 at 03:22:03PM -0700, \Jitendra Vegiraju wrote:
> @@ -42,13 +42,18 @@
>  #define DWXGMAC_CORE_2_20	0x22
>  #define DWXLGMAC_CORE_2_00	0x20
>  
> +#define DW25GMAC_CORE_3_20	0x32
> +#define DW25GMAC_CORE_4_00	0x40
> +

Do these live in the same versioning numberspace as DWXGMAC and
DWXLGMAC?

> +int dw25gmac_setup(struct stmmac_priv *priv)
> +{
> +	struct mac_device_info *mac = priv->hw;
> +
> +	dev_info(priv->device, "\tDW25GMAC\n");
> +
> +	priv->dev->priv_flags |= IFF_UNICAST_FLT;
> +	mac->pcsr = priv->ioaddr;
> +	mac->multicast_filter_bins = priv->plat->multicast_filter_bins;
> +	mac->unicast_filter_entries = priv->plat->unicast_filter_entries;
> +	mac->mcast_bits_log2 = 0;
> +
> +	if (mac->multicast_filter_bins)
> +		mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);

The above seems to be common amongst the other two setup functions.
Maybe there should be a helper for this?

> +
> +	mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
> +			 MAC_1000FD | MAC_2500FD | MAC_5000FD |
> +			 MAC_10000FD | MAC_25000FD;
> +	mac->link.duplex = 0;
> +	mac->link.speed10 = XGMAC_CONFIG_SS_10_MII;
> +	mac->link.speed100 = XGMAC_CONFIG_SS_100_MII;
> +	mac->link.speed1000 = XGMAC_CONFIG_SS_1000_GMII;
> +	mac->link.speed2500 = XGMAC_CONFIG_SS_2500_GMII;
> +	mac->link.xgmii.speed2500 = XGMAC_CONFIG_SS_2500;
> +	mac->link.xgmii.speed5000 = XGMAC_CONFIG_SS_5000;
> +	mac->link.xgmii.speed10000 = XGMAC_CONFIG_SS_10000;
> +	mac->link.xgmii.speed25000 = XGMAC_CONFIG_SS_25000;
> +	mac->link.speed_mask = XGMAC_CONFIG_SS_MASK;

Is there any point populating link.speed10 and link.speed100 ?
You're telling phylink that 10/100M speeds aren't supported in
link.caps, so these speeds won't ever be used.

> +
> +	mac->mii.addr = XGMAC_MDIO_ADDR;
> +	mac->mii.data = XGMAC_MDIO_DATA;
> +	mac->mii.addr_mask = GENMASK(20, 16);
> +	mac->mii.reg_mask = GENMASK(15, 0);
> +	mac->mii.clk_csr_mask = GENMASK(21, 19);

This will be the third instance of this particular mii data setup.
Please consider adding a function to do this setup.

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!