Re: [PATCH v2 1/2] dt-bindings: usb: nxp,ptn5110: add optional orientation-gpios property

[Rob Herring (Arm)]

On Thu, 12 Mar 2026 16:07:24 +0800, Xu Yang wrote:
> The Type-C chip know the cable orientation and then normally will set the
> switch channel to correctly configure the data path. Some chips itself
> support to output the control signal by indicating the capability in
> bit[0] of STANDARD_OUTPUT_CAPABILITIES register and do it in
> CONFIG_STANDARD_OUTPUT register. For PTN5110 which doesn't present this
> capability currently there is no way to achieve the orientation setting.
> Add an optional "orientation-gpios" property to achieve the same purpose.
> 
> Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>
> 
> ---
> Changes in v2:
>  - use property name "orientation-gpios"
>  - remove the "if" condition and modify commit message
> ---
>  Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml | 4 ++++
>  1 file changed, 4 insertions(+)
> 

Acked-by: Rob Herring (Arm) <robh@xxxxxxxxxx>