[PATCH 0/2] drm/bridge: display-connector: detect DP state if cable is plugged on boot

[Dmitry Baryshkov]

Unlike the USB-C AltMode handling and unlike the DP controller handling
the HPD on its own, if the display-connector is being used to handle the
HPD pin, DP controller might not be able to get either the HPD
notification nor detect the cable state if the cable is plugged in
before the system has booted.

Make the display-connector send the HPD notifications during system
startup for DisplayPort connectors.

It's typically not a problem for other types of display connectors since
there is no special procedure to detect if the monitor is actually
plugged in or not.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
---
Dmitry Baryshkov (2):
      drm/bridge: display-connector: don't autoenable HPD IRQ
      drm/bridge: display-connector: trigger initial HPD event for DP

 drivers/gpu/drm/bridge/display-connector.c | 36 ++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
---
base-commit: 5c9e55fecf9365890c64f14761a80f9413a3b1d1
change-id: 20260314-dp-connector-hpd-f069e66bc6af

Best regards,
-- 
With best wishes
Dmitry