[PATCH 3/3] MIPS: dts: loongson64g-package: Switch to Loongson UART driver

[Rong Zhang]

Loongson64g is Loongson 3A4000, whose UART controller is compatible with
Loongson 2K1500, which is NS16550A-compatible with an additional
fractional frequency divisor register.

Update the compatible strings to reflect this, so that 3A4000 can
benefit from the fractional frequency divisor provided by loongson-uart.
This is required on some devices, otherwise their UART can't work at
some high baud rates, e.g., 115200.

Tested on Loongson-LS3A4000-7A1000-NUC-SE with a 25MHz UART clock.
Without fractional frequency divisor, the actual baud rate was 111607
(25MHz / 16 / 14, measured value: 111545) and some USB-to-UART
converters couldn't work with it at all. With fractional frequency
divisor, the measured baud rate becomes 115207, which is quite accurate.

Signed-off-by: Rong Zhang <rongrong@xxxxxxxxxxxxxxxxx>
---
 arch/mips/boot/dts/loongson/loongson64g-package.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/boot/dts/loongson/loongson64g-package.dtsi b/arch/mips/boot/dts/loongson/loongson64g-package.dtsi
index d4314f62ccc2..029daeedd0ab 100644
--- a/arch/mips/boot/dts/loongson/loongson64g-package.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64g-package.dtsi
@@ -40,7 +40,7 @@ liointc: interrupt-controller@3ff01400 {
 		};
 
 		cpu_uart0: serial@1fe00100 {
-			compatible = "ns16550a";
+			compatible = "loongson,ls3a4000-uart", "loongson,ls2k1500-uart", "ns16550a";
 			reg = <0 0x1fe00100 0x10>;
 			clock-frequency = <100000000>;
 			interrupt-parent = <&liointc>;
@@ -50,7 +50,7 @@ cpu_uart0: serial@1fe00100 {
 
 		cpu_uart1: serial@1fe00110 {
 			status = "disabled";
-			compatible = "ns16550a";
+			compatible = "loongson,ls3a4000-uart", "loongson,ls2k1500-uart", "ns16550a";
 			reg = <0 0x1fe00110 0x10>;
 			clock-frequency = <100000000>;
 			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.53.0