Re: [PATCH v3 3/6] arm64: dts: qcom: msm8917-xiaomi-wingtech: Add goodix touch
From: David Heidelberg
Date: Sun Mar 15 2026 - 15:59:07 EST
On 15/03/2026 17:26, Barnabás Czémán wrote:
There are variants from MSM8917 wingtech xiaomis what
are using goodix touch controller instead of focaltech.
Add goodix node for make it able to use touch on all
variants.
Signed-off-by: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi | 16 ++++++++++++++++
The file is not in the linux-next or linus tree.
If this patch depends on another series, it should be stated here and preferably also reference (can be done with b4 tool).
David
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi
index 714e75de014b..69eda5f42c06 100644
--- a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi
@@ -102,6 +102,22 @@ edt_ft5306: touchscreen@38 {
status = "disabled";
};
+
+ goodix_gt911: touchscreen@5d {
+ compatible = "goodix,gt911";
+ reg = <0x5d>;
+ interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>;
+ irq-gpios = <&tlmm 65 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&tsp_int_rst_default>;
+ pinctrl-names = "default";
+ AVDD28-supply = <&pm8937_l10>;
+ VDDIO-supply = <&pm8937_l5>;
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+
+ status = "disabled";
+ };
};
&pm8937_gpios {
--
David Heidelberg