Re: [PATCH v5 0/9] arm64: dts: qcom: Add support for the Ayaneo Pocket S2

[Bjorn Helgaas]

On Fri, Feb 20, 2026 at 04:04:39PM +0100, Neil Armstrong wrote:
> The Ayaneo Pocket S2 is a gaming console based on the Qualcomm
> Snapdragon 8 Gen 3. It has an internal UFS storage, WiFi,
> Bluetooth, gaming buttons, SDCard, 2K display and USB-C
> connector.
> 
> Product Page [1].
> 
> The Initial linux port was done by KancyJoe (Sunflower2333)
> at [2].
> 
> [1] https://www.ayaneo.com/goods/9344082149621
> [2] https://github.com/sunflower2333/linux/tree/master
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
> Changes in v5:
> - Rebased on -next
> - Collected tags
> - Rebased/renamed slot to generic based on changes from Bjorn
> - Link to v4: https://patch.msgid.link/20260216-topic-sm8650-ayaneo-pocket-s2-base-v4-0-802c82795431@xxxxxxxxxx
> 
> Changes in v4:
> - Renamed slot to generic, in the code as well, fixed Kconfig & commit message
> - Switched the UPD72020x bindings additionalProperties to true to allow devices subnodes
> - Collected acks
> - Link to v3: https://patch.msgid.link/20260206-topic-sm8650-ayaneo-pocket-s2-base-v3-0-5b79c5d61a03@xxxxxxxxxx
> 
> Changes in v3:
> - Made renesas,upd720201-pci bindings supplies required
> - Fixed description and example of renesas,upd720201-pci bindings
> - Renamed slot to generic, added renesas,upd720201-pci entry
> - Used PMIC_GPIO_STRENGTH_LOW instead of numbers
> - Removed all output-low in pinconf
> - Link to v2: https://patch.msgid.link/20260127-topic-sm8650-ayaneo-pocket-s2-base-v2-0-c55ec1b5d8bf@xxxxxxxxxx
> 
> Changes in v2:
> - Add proper regulators for the USB controller, with bindings & power ctrl
> - Add proper regulators for FAN
> - Dropped support for headset over USB-C, audio is connected to a jack port
> - Cleaned up Audio routing and fixed the DP endpoint index
> - Added i2c clk frequencies
> - Renamed fan node and used interrupts-extended
> - Dropped the usb-c self-powered
> - Reordered nodes alphabetically
> - Renamed pcieport1 to pcie1_port0
> - Link to v1: https://patch.msgid.link/20260121-topic-sm8650-ayaneo-pocket-s2-base-v1-0-bb3f95f1c085@xxxxxxxxxx
> 
> ---
> KancyJoe (1):
>       arm64: dts: qcom: add basic devicetree for Ayaneo Pocket S2 gaming console
> 
> Neil Armstrong (8):
>       dt-bindings: usb: document the Renesas UPD720201/UPD720202 USB 3.0 xHCI Host Controller
>       pci: pwrctrl: slot: fix dev_err_probe() usage
>       pci: pwrctrl: rename pci-pwrctrl-slot as generic
>       pci: pwrctrl: generic: support for the UPD720201/UPD720202 USB 3.0 xHCI Host Controller
>       arm64: defconfig: enable pci-pwrctrl-generic as module
>       dt-binding: vendor-prefixes: document the Ayaneo brand
>       dt-bindings: arm: qcom: document the Ayaneo Pocket S2
>       arm64: dts: qcom: sm8650: Add sound DAI prefix for DP

I applied the drivers/pci/pwrctrl patches to pci/pwrctrl for v7.1,
thanks!

I reordered the rename to be first (and used "git mv") and updated the
subject lines to match the history.

>  Documentation/devicetree/bindings/arm/qcom.yaml    |    1 +
>  .../bindings/usb/renesas,upd720201-pci.yaml        |   61 +
>  .../devicetree/bindings/vendor-prefixes.yaml       |    2 +
>  arch/arm64/boot/dts/qcom/Makefile                  |    1 +
>  .../boot/dts/qcom/sm8650-ayaneo-pocket-s2.dts      | 1551 ++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/sm8650.dtsi               |   47 +-
>  arch/arm64/configs/defconfig                       |    1 +
>  drivers/pci/controller/dwc/Kconfig                 |    4 +-
>  drivers/pci/pwrctrl/Kconfig                        |   13 +-
>  drivers/pci/pwrctrl/Makefile                       |    4 +-
>  drivers/pci/pwrctrl/generic.c                      |  143 ++
>  drivers/pci/pwrctrl/slot.c                         |  140 --
>  12 files changed, 1795 insertions(+), 173 deletions(-)
> ---
> base-commit: df94cc5ccb88d2f6ebc0cac480a1b94162f4ff0f
> change-id: 20260121-topic-sm8650-ayaneo-pocket-s2-base-05c348efd86d
> 
> Best regards,
> -- 
> Neil Armstrong <neil.armstrong@xxxxxxxxxx>
>