[PATCH v4 0/2] Enable lt8713sx bridge with displayport for monaco-evk

[Vishnu Saini]

This series enables lt8713sx bridge and displayport on Qualcomm
monaco-evk platform.

Signed-off-by: Vishnu Saini <vishnu.saini@xxxxxxxxxxxxxxxx>
---
Changes in v4:
- Rebased on top of for-next branch.
- Renamed dp connector node and labels.
- Placed config as per savedefconfig
- Addressed review comments from: https://lore.kernel.org/r/20260317-lt8713sx_dt_for_next-v1-0-8195fa931ff1@xxxxxxxxxxxxxxxx
- Link to v3: https://lore.kernel.org/r/20251228-lt8713sx-bridge-linux-for-next-v3-0-3f77ad84d7d1@xxxxxxxxxxxxxxxx

Changes in v3:
- Used  existing qup_i2c0_data_clk as default i2c0 pinctrl and provided it's drive-strength, bias-pull-up.
- Link to v2: https://lore.kernel.org/r/20251219-lt8713sx-bridge-linux-for-next-v2-0-2e53f5490eb9@xxxxxxxxxxxxxxxx

Changes in v2:
- Configure DP PHY supplies and DP pinctrl
- Configure in/out ports and connectors for lt8713sx bridge
- Use correct base commit and fixed build issues 
- Link to v1: https://lore.kernel.org/r/20251120-lt8713sx-bridge-linux-for-next-v1-0-2246fc5fb490@xxxxxxxxxxxxxxxx

---
Vishnu Saini (2):
      arm64: dts: qcom: monaco-evk: add lt8713sx bridge with displayport
      arm64: defconfig: Enable Lontium LT8713sx driver

 arch/arm64/boot/dts/qcom/monaco-evk.dts | 89 +++++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/monaco.dtsi    |  6 +++
 arch/arm64/configs/defconfig            |  1 +
 3 files changed, 96 insertions(+)
---
base-commit: d639565b64d4781b3b36ff76b71ce1e68bda70c0
change-id: 20251120-lt8713sx-bridge-linux-for-next-30838c5a2719
prerequisite-message-id: <20260303-lt8713sx-bridge-driver-v5-0-6cc2a855aafa@xxxxxxxxxxxxxxxx>
prerequisite-patch-id: c5155e9804a0e30aba47c54471cf6870482d0738
prerequisite-patch-id: 44e87c690845b24fb4dd88bba67e89fcfd18048a

Best regards,
-- 
Vishnu Saini <vishnu.saini@xxxxxxxxxxxxxxxx>