Re: [PATCH net-next v9 2/4] net: phy: realtek: add RTL8224 pair order support

[Simon Horman]

On Wed, Mar 18, 2026 at 10:54:59PM +0100, Damien Dejean wrote:

...

> diff --git a/drivers/net/phy/realtek/realtek_main.c b/drivers/net/phy/realtek/realtek_main.c

...

> +static int rtl8224_mdi_config_order(struct phy_device *phydev)
> +{
> +	struct device_node *np = phydev->mdio.dev.of_node;
> +	u8 port_offset = phydev->mdio.addr & 3;
> +	u32 order = 0;
> +	int ret;
> +
> +	ret = of_property_read_u32(np, "enet-phy-pair-order", &order);
> +
> +	/* Do nothing in case the property is not present */
> +	if (ret == -EINVAL || ret == -ENOSYS)
> +		return 0;

Checkpatch warns that ENOSYS only means 'invalid syscall nr'.

Looking over the implementation of of_property_read_u32() it seems to me
that -EINVAL is sufficient to detect that a property is not present. Which
may be appropriate here.

Likewise in patch 4/4.

Using a quick grep of the tree, I do notice the same pattern as above is
also present (only?) in aquantia_main.c.  So depending on the outcome of this
discussion it might be appropriate to update that too.

> +
> +	if (ret)
> +		return ret;
> +
> +	if (order & ~1)
> +		return -EINVAL;
> +
> +	return rtl8224_package_modify_mmd(phydev, MDIO_MMD_VEND1,
> +					  RTL8224_VND1_MDI_PAIR_SWAP,
> +					  BIT(port_offset),
> +					  order ? BIT(port_offset) : 0);
> +}
> +
> +static int rtl8224_config_init(struct phy_device *phydev)
> +{
> +	return rtl8224_mdi_config_order(phydev);
> +}

...

> @@ -2395,6 +2457,8 @@ static struct phy_driver realtek_drvs[] = {
>  		PHY_ID_MATCH_EXACT(0x001ccad0),
>  		.name		= "RTL8224 2.5Gbps PHY",
>  		.flags		= PHY_POLL_CABLE_TEST,
> +		.probe		= rtl8224_probe,
> +		.config_init	= rtl8224_config_init,
>  		.get_features	= rtl822x_c45_get_features,
>  		.config_aneg	= rtl822x_c45_config_aneg,
>  		.read_status	= rtl822x_c45_read_status,
> -- 
> 2.47.3
>