[PATCH v4 5/8] riscv: dts: spacemit: k1-orangepi-rv2: add PMIC and power infrastructure

[Iker Pedrosa]

Add Spacemit P1 PMIC configuration and board power infrastructure for
voltage regulation support.

- Add board power regulators (12V input, 4V rail)
- Enable I2C8 for PMIC communication
- Configure PMIC with buck4 (vmmc) and aldo1 (vqmmc) regulators
- Set up regulator constraints for SD card operation

Tested-by: Anand Moon <linux.amoon@xxxxxxxxx>
Tested-by: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
Signed-off-by: Iker Pedrosa <ikerpedrosam@xxxxxxxxx>
---
 arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts | 48 ++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
index 7b7331cb3c726f11d597f81917f3a3f5fc21e1b9..9c417a483f6bad6e60617cf8d5400ca079588726 100644
--- a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
@@ -19,6 +19,25 @@ aliases {
 		ethernet1 = &eth1;
 	};
 
+	reg_dc_in: dc-in-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_in_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_vcc_4v: vcc-4v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_4v";
+		regulator-min-microvolt = <4000000>;
+		regulator-max-microvolt = <4000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&reg_dc_in>;
+	};
+
 	chosen {
 		stdout-path = "serial0";
 	};
@@ -92,3 +111,32 @@ &uart0 {
 	pinctrl-0 = <&uart0_2_cfg>;
 	status = "okay";
 };
+
+&i2c8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c8_cfg>;
+	status = "okay";
+
+	pmic@41 {
+		compatible = "spacemit,p1";
+		reg = <0x41>;
+		interrupts = <64>;
+		vin-supply = <&reg_vcc_4v>;
+
+		regulators {
+			buck4: buck4 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			aldo1: aldo1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};

-- 
2.53.0