Re: [PATCH 5/8] dt-bindings: mfd: ti,omap-usb-host: Convert to DT schema

[Conor Dooley]

On Mon, Mar 23, 2026 at 04:02:46PM +0100, Thomas Richard wrote:
> Convert OMAP HS USB Host binding to DT schema. The 'ti,hwmods' property is
> not mandatory anymore as it is no longer required when the omap-usb-host
> node is a child of a new interconnect target (ti,sysc).
> 
> Signed-off-by: Thomas Richard <thomas.richard@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/mfd/omap-usb-host.txt      | 103 ----------------
>  .../devicetree/bindings/mfd/ti,omap-usb-host.yaml  | 131 +++++++++++++++++++++
>  MAINTAINERS                                        |   1 +
>  3 files changed, 132 insertions(+), 103 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
> deleted file mode 100644
> index a0d8c30c2631e534cae50dfc7183cd04e744f31f..0000000000000000000000000000000000000000
> --- a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
> +++ /dev/null
> @@ -1,103 +0,0 @@
> -OMAP HS USB Host
> -
> -Required properties:
> -
> -- compatible: should be "ti,usbhs-host"
> -- reg: should contain one register range i.e. start and length
> -- ti,hwmods: must contain "usb_host_hs"
> -
> -Optional properties:
> -
> -- num-ports: number of USB ports. Usually this is automatically detected
> -  from the IP's revision register but can be overridden by specifying
> -  this property. A maximum of 3 ports are supported at the moment.
> -
> -- portN-mode: String specifying the port mode for port N, where N can be
> -  from 1 to 3. If the port mode is not specified, that port is treated
> -  as unused. When specified, it must be one of the following.
> -	"ehci-phy",
> -        "ehci-tll",
> -        "ehci-hsic",
> -        "ohci-phy-6pin-datse0",
> -        "ohci-phy-6pin-dpdm",
> -        "ohci-phy-3pin-datse0",
> -        "ohci-phy-4pin-dpdm",
> -        "ohci-tll-6pin-datse0",
> -        "ohci-tll-6pin-dpdm",
> -        "ohci-tll-3pin-datse0",
> -        "ohci-tll-4pin-dpdm",
> -        "ohci-tll-2pin-datse0",
> -        "ohci-tll-2pin-dpdm",
> -
> -- single-ulpi-bypass: Must be present if the controller contains a single
> -  ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1
> -
> -- clocks: a list of phandles and clock-specifier pairs, one for each entry in
> -  clock-names.
> -
> -- clock-names: should include:
> -  For OMAP3
> -  * "usbhost_120m_fck" - 120MHz Functional clock.
> -
> -  For OMAP4+
> -  * "refclk_60m_int" - 60MHz internal reference clock for UTMI clock mux
> -  * "refclk_60m_ext_p1" - 60MHz external ref. clock for Port 1's UTMI clock mux.
> -  * "refclk_60m_ext_p2" - 60MHz external ref. clock for Port 2's UTMI clock mux
> -  * "utmi_p1_gfclk" - Port 1 UTMI clock mux.
> -  * "utmi_p2_gfclk" - Port 2 UTMI clock mux.
> -  * "usb_host_hs_utmi_p1_clk" - Port 1 UTMI clock gate.
> -  * "usb_host_hs_utmi_p2_clk" - Port 2 UTMI clock gate.
> -  * "usb_host_hs_utmi_p3_clk" - Port 3 UTMI clock gate.
> -  * "usb_host_hs_hsic480m_p1_clk" - Port 1 480MHz HSIC clock gate.
> -  * "usb_host_hs_hsic480m_p2_clk" - Port 2 480MHz HSIC clock gate.
> -  * "usb_host_hs_hsic480m_p3_clk" - Port 3 480MHz HSIC clock gate.
> -  * "usb_host_hs_hsic60m_p1_clk" - Port 1 60MHz HSIC clock gate.
> -  * "usb_host_hs_hsic60m_p2_clk" - Port 2 60MHz HSIC clock gate.
> -  * "usb_host_hs_hsic60m_p3_clk" - Port 3 60MHz HSIC clock gate.
> -
> -Required properties if child node exists:
> -
> -- #address-cells: Must be 1
> -- #size-cells: Must be 1
> -- ranges: must be present
> -
> -Properties for children:
> -
> -The OMAP HS USB Host subsystem contains EHCI and OHCI controllers.
> -See Documentation/devicetree/bindings/usb/generic-ehci.yaml and
> -Documentation/devicetree/bindings/usb/generic-ohci.yaml.
> -
> -Example for OMAP4:
> -
> -usbhshost: usbhshost@4a064000 {
> -	compatible = "ti,usbhs-host";
> -	reg = <0x4a064000 0x800>;
> -	ti,hwmods = "usb_host_hs";
> -	#address-cells = <1>;
> -	#size-cells = <1>;
> -	ranges;
> -
> -	usbhsohci: ohci@4a064800 {
> -		compatible = "ti,ohci-omap3";
> -		reg = <0x4a064800 0x400>;
> -		interrupt-parent = <&gic>;
> -		interrupts = <0 76 0x4>;
> -	};
> -
> -	usbhsehci: ehci@4a064c00 {
> -		compatible = "ti,ehci-omap";
> -		reg = <0x4a064c00 0x400>;
> -		interrupt-parent = <&gic>;
> -		interrupts = <0 77 0x4>;
> -	};
> -};
> -
> -&usbhshost {
> -	port1-mode = "ehci-phy";
> -	port2-mode = "ehci-tll";
> -	port3-mode = "ehci-phy";
> -};
> -
> -&usbhsehci {
> -	phys = <&hsusb1_phy 0 &hsusb3_phy>;
> -};
> diff --git a/Documentation/devicetree/bindings/mfd/ti,omap-usb-host.yaml b/Documentation/devicetree/bindings/mfd/ti,omap-usb-host.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..7831ad891229aee650d83adcd82405c9dde472a8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/ti,omap-usb-host.yaml
> @@ -0,0 +1,131 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/ti,omap-usb-host.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: OMAP HS USB Host
> +
> +maintainers:
> +  - Thomas Richard <thomas.richard@xxxxxxxxxxx>
> +
> +description: |
> +  description
> +
> +properties:
> +  compatible:
> +    const: ti,usbhs-host
> +
> +  reg:
> +    maxItems: 1
> +
> +  ti,hwmods:
> +    const: usb_host_hs
> +
> +  num-ports:
> +    description:
> +      number of USB ports. Usually this is automatically detected from the IP's
> +      revision register but can be overridden by specifying this property. A
> +      maximum of 3 ports are supported at the moment.
> +    maximum: 3
> +
> +  single-ulpi-bypass:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      Must be present if the controller contains a single ULPI bypass control
> +      bit. e.g. OMAP3 silicon <= ES2.1ULPI bypass control bit.
> +      e.g. OMAP3 silicon <= ES2.1.
> +
> +  clocks:
> +    description: clock-specifier
> +
> +  clock-names:
> +    oneOf:
> +      - items:
> +          - const: usbhost_120m_fck
> +      - items:
> +          - const: refclk_60m_int
> +          - const: refclk_60m_ext_p1
> +          - const: refclk_60m_ext_p2

Looks like half the clocks are missing?

> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 1
> +
> +  ranges: true
> +
> +patternProperties:
> +  "^port[0-3]-mode$":
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description:
> +      String specifying the port mode for port N, where N can be from 1 to 3.
> +      the port mode is not specified, that port is treated as unused. When
> +      specified, it must be one of the following.
> +    enum:
> +      - ehci-phy
> +      - ehci-tll
> +      - ehci-hsic
> +      - ohci-phy-6pin-datse0
> +      - ohci-phy-6pin-dpdm
> +      - ohci-phy-3pin-datse0
> +      - ohci-phy-4pin-dpdm
> +      - ohci-tll-6pin-datse0
> +      - ohci-tll-6pin-dpdm
> +      - ohci-tll-3pin-datse0
> +      - ohci-tll-4pin-dpdm
> +      - ohci-tll-2pin-datse0
> +      - ohci-tll-2pin-dpdm
> +
> +  "^usb@":
> +    type: object

Can this include a ref to whatever binding describes these devices?
Looks like there's two, one for ochi and echi, at 400 and 800?

> +
> +required:
> +  - compatible
> +  - reg
> +
> +allOf:
> +  - if:
> +      patternProperties:
> +        "^usb@": true
> +    then:
> +      required:
> +        - ranges
> +        - "#address-cells"
> +        - "#size-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    bus {
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +
> +        usbhshost: usbhshost@4a064000 {
> +            compatible = "ti,usbhs-host";
> +            reg = <0x4a064000 0x800>;
> +            ti,hwmods = "usb_host_hs";
> +            port1-mode = "ehci-phy";
> +            port2-mode = "ehci-tll";
> +            port3-mode = "ehci-phy";
> +            #address-cells = <1>;
> +            #size-cells = <1>;
> +            ranges;
> +
> +            usbhsohci: usb@4a064800 {
> +                compatible = "ti,ohci-omap3";
> +                reg = <0x4a064800 0x400>;
> +                interrupt-parent = <&gic>;
> +                interrupts = <0 76 0x4>;
> +            };
> +
> +            usbhsehci: usb@4a064c00 {
> +                compatible = "ti,ehci-omap";
> +                reg = <0x4a064c00 0x400>;
> +                interrupt-parent = <&gic>;
> +                interrupts = <0 77 0x4>;
> +            };
> +        };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7d10988cbc62b77515aa1a1fee1c7d3e594869fa..28da3ac5896681bcdab29c23c98eff3612dc181d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19397,6 +19397,7 @@ W:	http://linux.omap.com/
>  Q:	http://patchwork.kernel.org/project/linux-omap/list/
>  T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
>  F:	Documentation/devicetree/bindings/arm/ti/omap.yaml
> +F:	Documentation/devicetree/bindings/mfd/ti,omap-usb-host.yaml
>  F:	arch/arm/configs/omap2plus_defconfig
>  F:	arch/arm/mach-omap2/
>  F:	drivers/bus/omap*.[ch]
> 
> -- 
> 2.53.0
>

Attachment: signature.asc
Description: PGP signature