[PATCH v2 11/12] arm64: dts: imx8mp-dhcom-som: Correct PAD settings for PMIC_nINT

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@xxxxxxx>

PMIC_nINT is low level triggered, but the current PAD settings is
PE=0,PUE=0,FSEL_1_FAST_SLEW_RATE=1,SION=1. So PAD needs to be configured
as PULL UP with PULL Enable, no need SION. Correct it.

Fixes: 8d6712695bc8e ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2")
Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index f8303b7e2bd22b9529d5f3063894d1cdd5556d59..0a6a60670f762f1400653d1e7d0f4c0fcaf6bcd4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -989,7 +989,7 @@ MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x22
 	pinctrl_pmic: dhcom-pmic-grp {
 		fsl,pins = <
 			/* PMIC_nINT */
-			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x40000090
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x1c0
 		>;
 	};
 

-- 
2.37.1