Re: [PATCH v4 6/9] arm64: dts: amlogic: t7: khadas-vim4: Add power regulators

[Neil Armstrong]

On 3/25/26 10:15, Ronald Claveau wrote:
> Add voltage regulator nodes describing the VIM4 power tree,
> required by peripheral nodes such as the SD card controller.
>
> Signed-off-by: Ronald Claveau <linux-kernel-dev@xxxxxxxx>
> ---
>   .../dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts  | 90 ++++++++++++++++++++++
>   1 file changed, 90 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
> index fffdab96b12eb..2450084d37642 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
> @@ -6,6 +6,8 @@
>   /dts-v1/;
>   
>   #include "amlogic-t7.dtsi"
> +#include <dt-bindings/gpio/amlogic,t7-periphs-pinctrl.h>
> +#include <dt-bindings/gpio/gpio.h>
>   
>   / {
>   	model = "Khadas vim4";
> @@ -45,6 +47,94 @@ xtal: xtal-clk {
>   		#clock-cells = <0>;
>   	};
>   
> +	dc_in: regulator-dc-in {
> +		compatible = "regulator-fixed";
> +		regulator-name = "DC_IN";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-always-on;
> +	};
> +
> +	sd_3v3: regulator-sdcard-3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "SD_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vddao_3v3>;
> +		gpio = <&gpio GPIOD_11 GPIO_ACTIVE_LOW>;
> +		regulator-boot-on;
> +		enable-active-low;
> +		regulator-always-on;
> +	};
> +
> +	vcc5v: regulator-vcc-5v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VCC5V";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&dc_in>;
> +
> +		gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	vcc5v0_usb: regulator-vcc-usb {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VCC5V0_USB";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc5v>;
> +
> +		gpio = <&gpio GPIOY_5 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	vddao_1v8: regulator-vddao-1v8 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDDAO_1V8";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		vin-supply = <&vddao_3v3>;
> +		regulator-always-on;
> +	};
> +
> +	vddao_3v3: regulator-vddao-3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDDAO_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&dc_in>;
> +		regulator-always-on;
> +	};
> +
> +	vddio_1v8: regulator-vddio-1v8 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDDIO_1V8";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		vin-supply = <&vddio_3v3>;
> +		regulator-always-on;
> +	};
> +
> +	vddio_3v3: regulator-vddio-3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDDIO_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vddao_3v3>;
> +		regulator-always-on;
> +	};
> +
> +	vddio_c: regulator-gpio-c {
> +		compatible = "regulator-gpio";
> +		regulator-name = "VDDIO_C";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vddio_3v3>;
> +		gpios = <&gpio GPIOD_9 GPIO_ACTIVE_HIGH>;
> +		states = <1800000 1
> +			  3300000 0>;
> +	};
>   };
>   
>   &uart_a {

Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>

Thanks,
Neil