[PATCH v5 0/9] arm64: dts: amlogic: Add MMC/SD/SDIO support for Khadas VIM4 (Amlogic T7)

[Ronald Claveau]

This patch series depends on Jian's SCMI clock patches yet to merge
https://lore.kernel.org/all/20260313070022.700437-1-jian.hu@xxxxxxxxxxx/

This series adds device tree support for the MMC, SD card and SDIO
interfaces on the Amlogic T7 SoC and the Khadas VIM4 board.

The first patches add the necessary building blocks in the T7 SoC
DTSI: pinctrl nodes for pin muxing, PWM controller nodes, and MMC
controller nodes. The amlogic,t7-mmc and amlogic,t7-pwm compatible
strings are introduced with fallbacks to existing drivers, avoiding
the need for new driver code.

The remaining patches enable these interfaces on the Khadas VIM4
board, including the power regulators, the SDIO power sequence and
32.768kHz PWM clock required by the BCM43752 Wi-Fi module, and the
board-specific MMC controller configurations.

Signed-off-by: Ronald Claveau <linux-kernel-dev@xxxxxxxx>
---
Changes in v5:
- Add missing trailers according to Rob's feedback.
- Change mux-0 to mux in pinctrl nodes for single mux. Neil's feedback.
- Move disabled status at the end of node properties. Neil's feedback.
- Restore space instead of tab in VIM4 DTS file according to Neil's feedback.
- Link to v4: https://lore.kernel.org/r/20260325-add-emmc-t7-vim4-v4-0-44c7b4a5e459@xxxxxxxx

Changes in v4:
- Address potential DT binding API break from Xianwei's feedback.
- Change underscore to dash in pinctrl nodes names from Xianwei's feedback.
- Link to v3: https://lore.kernel.org/r/20260323-add-emmc-t7-vim4-v3-0-5159d90a984c@xxxxxxxx

Changes in v3:
- Remove all changes about fixed pll clock from analog controller.
- Use clocks retrieved through SCMI.
- Add other MMC controllers
- Manage Wi-Fi module enablement. 
- Link to v2: https://lore.kernel.org/r/20260218101709.35450-1-linux-kernel-dev@xxxxxxxx

Changes in v2:
- Resend v1 patches as attached to the first patch.
- Link to v1: https://lore.kernel.org/r/20260218101709.35450-1-linux-kernel-dev@xxxxxxxx

---
Ronald Claveau (9):
      arm64: dts: amlogic: t7: Add eMMC, SD card and SDIO pinctrl nodes
      dt-bindings: mmc: amlogic: Add compatible for T7 mmc
      arm64: dts: amlogic: t7: Add MMC controller nodes
      arm64: dts: amlogic: t7: Add PWM pinctrl nodes
      arm64: dts: amlogic: t7: Add PWM controller nodes
      arm64: dts: amlogic: t7: khadas-vim4: Add power regulators
      arm64: dts: amlogic: t7: khadas-vim4: Add SDIO power sequence and WiFi clock
      dt-bindings: net: wireless: brcm: Add compatible for bcm43752
      arm64: dts: amlogic: t7: khadas-vim4: Add MMC nodes

 .../bindings/mmc/amlogic,meson-gx-mmc.yaml         |   4 +
 .../bindings/net/wireless/brcm,bcm4329-fmac.yaml   |   1 +
 .../dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts  | 200 ++++++++++++
 arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi        | 336 +++++++++++++++++++++
 4 files changed, 541 insertions(+)
---
base-commit: f6eb9ae8b9fc13c3971e4a6d1e8442f253001f36
change-id: 20260320-add-emmc-t7-vim4-6ad16e94614f
prerequisite-message-id: <20260313070022.700437-1-jian.hu@xxxxxxxxxxx>
prerequisite-patch-id: f03a086b4137158412b2d47b3de793b858de8dde
prerequisite-patch-id: 123970c9b29c2090440f2fd71c85d3c6fd8e36de
prerequisite-patch-id: 3e2e56b0926ba327b520f935df4ced5089bbe503

Best regards,
-- 
Ronald Claveau <linux-kernel-dev@xxxxxxxx>