[PATCH] arm64: dts: qcom: Move board nodes to common DTSI
From: Gopikrishna Garmidi
Date: Thu Mar 26 2026 - 10:39:16 EST
The display, peripherals (touchpad/touchscreen/keypad), usb and their
dependent device nodes are common to both Glymur and Mahua CRDs,
so move them from glymur-crd.dts to glymur-crd.dtsi to enable code
reuse.
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/glymur-crd.dts | 403 -------------------------------
arch/arm64/boot/dts/qcom/glymur-crd.dtsi | 401 ++++++++++++++++++++++++++++++
2 files changed, 401 insertions(+), 403 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dts b/arch/arm64/boot/dts/qcom/glymur-crd.dts
index 51ea23a49b9e..0efd9e27c82f 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dts
@@ -8,410 +8,7 @@
#include "glymur.dtsi"
#include "glymur-crd.dtsi"
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
/ {
model = "Qualcomm Technologies, Inc. Glymur CRD";
compatible = "qcom,glymur-crd", "qcom,glymur";
-
- pmic-glink {
- compatible = "qcom,glymur-pmic-glink",
- "qcom,pmic-glink";
- #address-cells = <1>;
- #size-cells = <0>;
-
- connector@0 {
- compatible = "usb-c-connector";
- reg = <0>;
- power-role = "dual";
- data-role = "dual";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- pmic_glink_hs_in: endpoint {
- remote-endpoint = <&usb_0_dwc3_hs>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- pmic_glink_ss_in: endpoint {
- remote-endpoint = <&usb_0_qmpphy_out>;
- };
- };
- };
- };
-
- connector@1 {
- compatible = "usb-c-connector";
- reg = <1>;
- power-role = "dual";
- data-role = "dual";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- pmic_glink_hs_in1: endpoint {
- remote-endpoint = <&usb_1_dwc3_hs>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- pmic_glink_ss_in1: endpoint {
- remote-endpoint = <&usb_1_qmpphy_out>;
- };
- };
- };
- };
- };
-
- vreg_edp_3p3: regulator-edp-3p3 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_EDP_3P3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&edp_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- vreg_misc_3p3: regulator-misc-3p3 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_MISC_3P3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&pmh0110_f_e0_gpios 6 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&misc_3p3_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-};
-
-&i2c0 {
- clock-frequency = <400000>;
-
- status = "okay";
-
- touchpad@2c {
- compatible = "hid-over-i2c";
- reg = <0x2c>;
-
- hid-descr-addr = <0x20>;
- interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
-
- vdd-supply = <&vreg_misc_3p3>;
- vddl-supply = <&vreg_l15b_e0_1p8>;
-
- pinctrl-0 = <&tpad_default>;
- pinctrl-names = "default";
-
- wakeup-source;
- };
-
- keyboard@3a {
- compatible = "hid-over-i2c";
- reg = <0x3a>;
-
- hid-descr-addr = <0x1>;
- interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
-
- vdd-supply = <&vreg_misc_3p3>;
- vddl-supply = <&vreg_l15b_e0_1p8>;
-
- pinctrl-0 = <&kybd_default>;
- pinctrl-names = "default";
-
- wakeup-source;
- };
-};
-
-&i2c8 {
- clock-frequency = <400000>;
-
- status = "okay";
-
- touchscreen@38 {
- compatible = "hid-over-i2c";
- reg = <0x38>;
-
- hid-descr-addr = <0x1>;
- interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
-
- vdd-supply = <&vreg_misc_3p3>;
- vddl-supply = <&vreg_l15b_e0_1p8>;
-
- pinctrl-0 = <&ts0_default>;
- pinctrl-names = "default";
- };
-};
-
-&i2c5 {
- clock-frequency = <400000>;
-
- status = "okay";
-
- ptn3222_0: redriver@43 {
- compatible = "nxp,ptn3222";
- reg = <0x43>;
-
- reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
-
- vdd3v3-supply = <&vreg_l8b_e0_1p50>;
- vdd1v8-supply = <&vreg_l15b_e0_1p8>;
-
- #phy-cells = <0>;
- };
-
- ptn3222_1: redriver@47 {
- compatible = "nxp,ptn3222";
- reg = <0x47>;
-
- reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
-
- vdd3v3-supply = <&vreg_l8b_e0_1p50>;
- vdd1v8-supply = <&vreg_l15b_e0_1p8>;
-
- #phy-cells = <0>;
- };
-};
-
-&mdss {
- status = "okay";
-};
-
-&mdss_dp3 {
- /delete-property/ #sound-dai-cells;
-
- status = "okay";
-
- aux-bus {
- panel {
- compatible = "samsung,atna60cl08", "samsung,atna33xc20";
- enable-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
- power-supply = <&vreg_edp_3p3>;
-
- pinctrl-0 = <&edp_bl_en>;
- pinctrl-names = "default";
-
- port {
- edp_panel_in: endpoint {
- remote-endpoint = <&mdss_dp3_out>;
- };
- };
- };
- };
-};
-
-&mdss_dp3_out {
- data-lanes = <0 1 2 3>;
- link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-
- remote-endpoint = <&edp_panel_in>;
-};
-
-&mdss_dp3_phy {
- vdda-phy-supply = <&vreg_l2f_e1_0p83>;
- vdda-pll-supply = <&vreg_l4f_e1_1p08>;
-
- status = "okay";
-};
-
-&pmh0110_f_e0_gpios {
- misc_3p3_reg_en: misc-3p3-reg-en-state {
- pins = "gpio6";
- function = "normal";
- bias-disable;
- input-disable;
- output-enable;
- drive-push-pull;
- power-source = <1>; /* 1.8 V */
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- };
-};
-
-&smb2370_j_e2_eusb2_repeater {
- vdd18-supply = <&vreg_l15b_e0_1p8>;
- vdd3-supply = <&vreg_l7b_e0_2p79>;
-};
-
-&smb2370_k_e2_eusb2_repeater {
- vdd18-supply = <&vreg_l15b_e0_1p8>;
- vdd3-supply = <&vreg_l7b_e0_2p79>;
-};
-
-&tlmm {
- edp_bl_en: edp-bl-en-state {
- pins = "gpio18";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- };
-
- edp_reg_en: edp-reg-en-state {
- pins = "gpio70";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- };
-
- kybd_default: kybd-default-state {
- pins = "gpio67";
- function = "gpio";
- bias-disable;
- };
-
- tpad_default: tpad-default-state {
- pins = "gpio3";
- function = "gpio";
- bias-disable;
- };
-
- ts0_default: ts0-default-state {
- int-n-pins {
- pins = "gpio51";
- function = "gpio";
- bias-disable;
- };
-
- reset-n-pins {
- pins = "gpio48";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- };
- };
-};
-
-&usb_0 {
- dr_mode = "host";
-
- status = "okay";
-};
-
-&usb_0_dwc3_hs {
- remote-endpoint = <&pmic_glink_hs_in>;
-};
-
-&usb_0_hsphy {
- vdd-supply = <&vreg_l3f_e0_0p72>;
- vdda12-supply = <&vreg_l4h_e0_1p2>;
-
- phys = <&smb2370_j_e2_eusb2_repeater>;
-
- status = "okay";
-};
-
-&usb_0_qmpphy {
- vdda-phy-supply = <&vreg_l4h_e0_1p2>;
- vdda-pll-supply = <&vreg_l3f_e0_0p72>;
- refgen-supply = <&vreg_l2f_e0_0p82>;
-
- status = "okay";
-};
-
-&usb_0_qmpphy_out {
- remote-endpoint = <&pmic_glink_ss_in>;
-};
-
-&usb_1 {
- dr_mode = "host";
-
- status = "okay";
-};
-
-&usb_1_dwc3_hs {
- remote-endpoint = <&pmic_glink_hs_in1>;
-};
-
-&usb_1_hsphy {
- vdd-supply = <&vreg_l3f_e0_0p72>;
- vdda12-supply = <&vreg_l4h_e0_1p2>;
-
- phys = <&smb2370_k_e2_eusb2_repeater>;
-
- status = "okay";
-};
-
-&usb_1_qmpphy {
- vdda-phy-supply = <&vreg_l4h_e0_1p2>;
- vdda-pll-supply = <&vreg_l1h_e0_0p89>;
- refgen-supply = <&vreg_l2f_e0_0p82>;
-
- status = "okay";
-};
-
-&usb_1_qmpphy_out {
- remote-endpoint = <&pmic_glink_ss_in1>;
-};
-
-&usb_hs {
- status = "okay";
-};
-
-&usb_hs_phy {
- vdd-supply = <&vreg_l2h_e0_0p72>;
- vdda12-supply = <&vreg_l4h_e0_1p2>;
-
- phys = <&ptn3222_1>;
-
- status = "okay";
-};
-
-&usb_mp {
- status = "okay";
-};
-
-&usb_mp_hsphy0 {
- vdd-supply = <&vreg_l2h_e0_0p72>;
- vdda12-supply = <&vreg_l4h_e0_1p2>;
-
- phys = <&ptn3222_0>;
-
- status = "okay";
-};
-
-&usb_mp_hsphy1 {
- vdd-supply = <&vreg_l2h_e0_0p72>;
- vdda12-supply = <&vreg_l4h_e0_1p2>;
-
- status = "okay";
-};
-
-&usb_mp_qmpphy0 {
- vdda-phy-supply = <&vreg_l4h_e0_1p2>;
- vdda-pll-supply = <&vreg_l2h_e0_0p72>;
- refgen-supply = <&vreg_l4f_e1_1p08>;
-
- status = "okay";
-};
-
-&usb_mp_qmpphy1 {
- vdda-phy-supply = <&vreg_l4h_e0_1p2>;
- vdda-pll-supply = <&vreg_l2h_e0_0p72>;
- refgen-supply = <&vreg_l4f_e1_1p08>;
-
- status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
index abc6cc8bb0a8..5ba9e586f3cf 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
@@ -10,6 +10,8 @@
#include "pmk8850.dtsi" /* SPMI0: SID-0 */
#include "smb2370.dtsi" /* SPMI2: SID-9/10/11 */
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
/ {
model = "Qualcomm Technologies, Inc. Glymur CRD";
compatible = "qcom,glymur-crd", "qcom,glymur";
@@ -57,6 +59,101 @@ key-volume-up {
};
};
+ pmic-glink {
+ compatible = "qcom,glymur-pmic-glink",
+ "qcom,pmic-glink";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint = <&usb_0_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss_in: endpoint {
+ remote-endpoint = <&usb_0_qmpphy_out>;
+ };
+ };
+ };
+ };
+
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in1: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss_in1: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_out>;
+ };
+ };
+ };
+ };
+ };
+
+ vreg_edp_3p3: regulator-edp-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_EDP_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&edp_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_misc_3p3: regulator-misc-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_MISC_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pmh0110_f_e0_gpios 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&misc_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
vreg_nvme: regulator-nvme {
compatible = "regulator-fixed";
@@ -364,6 +461,135 @@ vreg_l4h_e0_1p2: ldo4 {
};
};
+&i2c0 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ touchpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+
+ hid-descr-addr = <0x20>;
+ interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l15b_e0_1p8>;
+
+ pinctrl-0 = <&tpad_default>;
+ pinctrl-names = "default";
+
+ wakeup-source;
+ };
+
+ keyboard@3a {
+ compatible = "hid-over-i2c";
+ reg = <0x3a>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l15b_e0_1p8>;
+
+ pinctrl-0 = <&kybd_default>;
+ pinctrl-names = "default";
+
+ wakeup-source;
+ };
+};
+
+&i2c5 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ ptn3222_0: redriver@43 {
+ compatible = "nxp,ptn3222";
+ reg = <0x43>;
+
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+
+ vdd3v3-supply = <&vreg_l8b_e0_1p50>;
+ vdd1v8-supply = <&vreg_l15b_e0_1p8>;
+
+ #phy-cells = <0>;
+ };
+
+ ptn3222_1: redriver@47 {
+ compatible = "nxp,ptn3222";
+ reg = <0x47>;
+
+ reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+
+ vdd3v3-supply = <&vreg_l8b_e0_1p50>;
+ vdd1v8-supply = <&vreg_l15b_e0_1p8>;
+
+ #phy-cells = <0>;
+ };
+};
+
+&i2c8 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ touchscreen@38 {
+ compatible = "hid-over-i2c";
+ reg = <0x38>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l15b_e0_1p8>;
+
+ pinctrl-0 = <&ts0_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp3 {
+ /delete-property/ #sound-dai-cells;
+
+ status = "okay";
+
+ aux-bus {
+ panel {
+ compatible = "samsung,atna60cl08", "samsung,atna33xc20";
+ enable-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+ power-supply = <&vreg_edp_3p3>;
+
+ pinctrl-0 = <&edp_bl_en>;
+ pinctrl-names = "default";
+
+ port {
+ edp_panel_in: endpoint {
+ remote-endpoint = <&mdss_dp3_out>;
+ };
+ };
+ };
+ };
+};
+
+&mdss_dp3_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+ remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+ vdda-phy-supply = <&vreg_l2f_e1_0p83>;
+ vdda-pll-supply = <&vreg_l4f_e1_1p08>;
+
+ status = "okay";
+};
+
&pcie3b {
vddpe-3v3-supply = <&vreg_nvmesec>;
@@ -469,6 +695,19 @@ key_vol_up_default: key-vol-up-default-state {
};
};
+&pmh0110_f_e0_gpios {
+ misc_3p3_reg_en: misc-3p3-reg-en-state {
+ pins = "gpio6";
+ function = "normal";
+ bias-disable;
+ input-disable;
+ output-enable;
+ drive-push-pull;
+ power-source = <1>; /* 1.8 V */
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
+};
+
&pmk8850_rtc {
qcom,no-alarm;
};
@@ -478,11 +717,41 @@ &pon_resin {
status = "okay";
};
+&smb2370_j_e2_eusb2_repeater {
+ vdd18-supply = <&vreg_l15b_e0_1p8>;
+ vdd3-supply = <&vreg_l7b_e0_2p79>;
+};
+
+&smb2370_k_e2_eusb2_repeater {
+ vdd18-supply = <&vreg_l15b_e0_1p8>;
+ vdd3-supply = <&vreg_l7b_e0_2p79>;
+};
+
&tlmm {
gpio-reserved-ranges = <4 4>, /* EC TZ Secure I3C */
<10 2>, /* OOB UART */
<44 4>; /* Security SPI (TPM) */
+ edp_bl_en: edp-bl-en-state {
+ pins = "gpio18";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ edp_reg_en: edp-reg-en-state {
+ pins = "gpio70";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ kybd_default: kybd-default-state {
+ pins = "gpio67";
+ function = "gpio";
+ bias-disable;
+ };
+
pcie4_default: pcie4-default-state {
clkreq-n-pins {
pins = "gpio147";
@@ -575,6 +844,27 @@ wake-n-pins {
};
};
+ tpad_default: tpad-default-state {
+ pins = "gpio3";
+ function = "gpio";
+ bias-disable;
+ };
+
+ ts0_default: ts0-default-state {
+ int-n-pins {
+ pins = "gpio51";
+ function = "gpio";
+ bias-disable;
+ };
+
+ reset-n-pins {
+ pins = "gpio48";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
wlan_reg_en: wlan-reg-en-state {
pins = "gpio94";
function = "gpio";
@@ -589,3 +879,114 @@ wwan_reg_en: wwan-reg-en-state {
bias-disable;
};
};
+
+&usb_0 {
+ dr_mode = "host";
+
+ status = "okay";
+};
+
+&usb_0_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_0_hsphy {
+ vdd-supply = <&vreg_l3f_e0_0p72>;
+ vdda12-supply = <&vreg_l4h_e0_1p2>;
+
+ phys = <&smb2370_j_e2_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_0_qmpphy {
+ vdda-phy-supply = <&vreg_l4h_e0_1p2>;
+ vdda-pll-supply = <&vreg_l3f_e0_0p72>;
+ refgen-supply = <&vreg_l2f_e0_0p82>;
+
+ status = "okay";
+};
+
+&usb_0_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1 {
+ dr_mode = "host";
+
+ status = "okay";
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in1>;
+};
+
+&usb_1_hsphy {
+ vdd-supply = <&vreg_l3f_e0_0p72>;
+ vdda12-supply = <&vreg_l4h_e0_1p2>;
+
+ phys = <&smb2370_k_e2_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vreg_l4h_e0_1p2>;
+ vdda-pll-supply = <&vreg_l1h_e0_0p89>;
+ refgen-supply = <&vreg_l2f_e0_0p82>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss_in1>;
+};
+
+&usb_hs {
+ status = "okay";
+};
+
+&usb_hs_phy {
+ vdd-supply = <&vreg_l2h_e0_0p72>;
+ vdda12-supply = <&vreg_l4h_e0_1p2>;
+
+ phys = <&ptn3222_1>;
+
+ status = "okay";
+};
+
+&usb_mp {
+ status = "okay";
+};
+
+&usb_mp_hsphy0 {
+ vdd-supply = <&vreg_l2h_e0_0p72>;
+ vdda12-supply = <&vreg_l4h_e0_1p2>;
+
+ phys = <&ptn3222_0>;
+
+ status = "okay";
+};
+
+&usb_mp_hsphy1 {
+ vdd-supply = <&vreg_l2h_e0_0p72>;
+ vdda12-supply = <&vreg_l4h_e0_1p2>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+ vdda-phy-supply = <&vreg_l4h_e0_1p2>;
+ vdda-pll-supply = <&vreg_l2h_e0_0p72>;
+ refgen-supply = <&vreg_l4f_e1_1p08>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+ vdda-phy-supply = <&vreg_l4h_e0_1p2>;
+ vdda-pll-supply = <&vreg_l2h_e0_0p72>;
+ refgen-supply = <&vreg_l4f_e1_1p08>;
+
+ status = "okay";
+};
---
base-commit: 66ba480978ce390e631e870b740a3406e3eb6b01
change-id: 20260326-glymur-mahua-common-nodes-893fd80808cb
Best regards,
--
Gopikrishna Garmidi <gopikrishna.garmidi@xxxxxxxxxxxxxxxx>