[PATCH v3 07/15] soc: qcom: mdtloader: Switch to generic PAS TZ APIs

From: Sumit Garg

Date: Fri Mar 27 2026 - 09:19:15 EST


From: Sumit Garg <sumit.garg@xxxxxxxxxxxxxxxx>

Switch mdtloader client driver over to generic PAS TZ APIs. Generic PAS
TZ service allows to support multiple TZ implementation backends like QTEE
based SCM PAS service, OP-TEE based PAS service and any further future TZ
backend service.

Signed-off-by: Sumit Garg <sumit.garg@xxxxxxxxxxxxxxxx>
---
drivers/soc/qcom/mdt_loader.c | 12 ++++++------
include/linux/soc/qcom/mdt_loader.h | 6 +++---
2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/soc/qcom/mdt_loader.c b/drivers/soc/qcom/mdt_loader.c
index c004d444d698..fdde7eda538a 100644
--- a/drivers/soc/qcom/mdt_loader.c
+++ b/drivers/soc/qcom/mdt_loader.c
@@ -13,7 +13,7 @@
#include <linux/firmware.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/firmware/qcom/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_pas.h>
#include <linux/sizes.h>
#include <linux/slab.h>
#include <linux/soc/qcom/mdt_loader.h>
@@ -229,7 +229,7 @@ EXPORT_SYMBOL_GPL(qcom_mdt_read_metadata);

static int __qcom_mdt_pas_init(struct device *dev, const struct firmware *fw,
const char *fw_name, int pas_id, phys_addr_t mem_phys,
- struct qcom_scm_pas_context *ctx)
+ struct qcom_pas_context *ctx)
{
const struct elf32_phdr *phdrs;
const struct elf32_phdr *phdr;
@@ -271,7 +271,7 @@ static int __qcom_mdt_pas_init(struct device *dev, const struct firmware *fw,
goto out;
}

- ret = qcom_scm_pas_init_image(pas_id, metadata, metadata_len, ctx);
+ ret = qcom_pas_init_image(pas_id, metadata, metadata_len, ctx);
kfree(metadata);
if (ret) {
/* Invalid firmware metadata */
@@ -280,7 +280,7 @@ static int __qcom_mdt_pas_init(struct device *dev, const struct firmware *fw,
}

if (relocate) {
- ret = qcom_scm_pas_mem_setup(pas_id, mem_phys, max_addr - min_addr);
+ ret = qcom_pas_mem_setup(pas_id, mem_phys, max_addr - min_addr);
if (ret) {
/* Unable to set up relocation */
dev_err(dev, "error %d setting up firmware %s\n", ret, fw_name);
@@ -472,7 +472,7 @@ EXPORT_SYMBOL_GPL(qcom_mdt_load);
* firmware segments (e.g., .bXX files). Authentication of the segments done
* by a separate call.
*
- * The PAS context must be initialized using qcom_scm_pas_context_init()
+ * The PAS context must be initialized using qcom_pas_context_init()
* prior to invoking this function.
*
* @ctx: Pointer to the PAS (Peripheral Authentication Service) context
@@ -483,7 +483,7 @@ EXPORT_SYMBOL_GPL(qcom_mdt_load);
*
* Return: 0 on success or a negative error code on failure.
*/
-int qcom_mdt_pas_load(struct qcom_scm_pas_context *ctx, const struct firmware *fw,
+int qcom_mdt_pas_load(struct qcom_pas_context *ctx, const struct firmware *fw,
const char *firmware, void *mem_region, phys_addr_t *reloc_base)
{
int ret;
diff --git a/include/linux/soc/qcom/mdt_loader.h b/include/linux/soc/qcom/mdt_loader.h
index 82372e0db0a1..142409555425 100644
--- a/include/linux/soc/qcom/mdt_loader.h
+++ b/include/linux/soc/qcom/mdt_loader.h
@@ -10,7 +10,7 @@

struct device;
struct firmware;
-struct qcom_scm_pas_context;
+struct qcom_pas_context;

#if IS_ENABLED(CONFIG_QCOM_MDT_LOADER)

@@ -20,7 +20,7 @@ int qcom_mdt_load(struct device *dev, const struct firmware *fw,
phys_addr_t mem_phys, size_t mem_size,
phys_addr_t *reloc_base);

-int qcom_mdt_pas_load(struct qcom_scm_pas_context *ctx, const struct firmware *fw,
+int qcom_mdt_pas_load(struct qcom_pas_context *ctx, const struct firmware *fw,
const char *firmware, void *mem_region, phys_addr_t *reloc_base);

int qcom_mdt_load_no_init(struct device *dev, const struct firmware *fw,
@@ -45,7 +45,7 @@ static inline int qcom_mdt_load(struct device *dev, const struct firmware *fw,
return -ENODEV;
}

-static inline int qcom_mdt_pas_load(struct qcom_scm_pas_context *ctx,
+static inline int qcom_mdt_pas_load(struct qcom_pas_context *ctx,
const struct firmware *fw, const char *firmware,
void *mem_region, phys_addr_t *reloc_base)
{
--
2.51.0