Re: [PATCH 00/14] media: rzg2l-cru: Rework slot programming for V2H/G3E

From: Lad, Prabhakar

Date: Sat Mar 28 2026 - 11:26:33 EST


Hi Jacopo,

On Sat, Mar 28, 2026 at 11:55 AM Jacopo Mondi
<jacopo.mondi@xxxxxxxxxxxxxxxx> wrote:
>
> Hi Prabhakar
>
> On Fri, Mar 27, 2026 at 05:25:30PM +0000, Lad, Prabhakar wrote:
> > Hi Jacopo,
> >
> > Thank you for the patches.
> >
> > On Fri, Mar 27, 2026 at 5:19 PM Jacopo Mondi
> > <jacopo.mondi@xxxxxxxxxxxxxxxx> wrote:
> > >
> > > This patch series starts by collecting a patch sent from Dan in the past
> > > which improves the HW slot programming on V2H(P) to avoid losing frames
> > > under heavy system load conditions.
> > >
> > > Tommaso also sent a series a few months ago for the CRU from which I
> > > collected the first two patches.
> > >
> > > Around it, I've reworked a bit the locking in the driver which is a bit
> > > coarse and causes lost of frames under heavy system load conditions.
> > >
> > > Along with these, bit of drive-by cometic changes here and there to
> > > modernize the driver code.
> > >
> > > I've tested on V2H(P) but I've also modified the G2L IRQ handler, so if
> > > anyone could test on G2L and G3E it would be great!
> > >
> > > Signed-off-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
> > > ---
> > > Daniel Scally (1):
> > > media: rzg2l-cru: Rework rzg2l_cru_fill_hw_slot()
> > >
> > > Jacopo Mondi (11):
> > > media: rzg2l-cru: Modernize spin_lock usage with cleanup.h
> > > media: rzg2l-cru: Use proper guard() in irq handler
> > > media: rzg2l-cru: Remove locking from start/stop routines
> > > media: rzg2l-cru: Do not use irqsave when not needed
> > > media: rzg2l-cru: Remove wrong locking comment
> > > media: rz2gl-cru: Introduce a spinlock for hw operations
> > > media: rzg2l-cru: Split hw locking from buffers
> > > media: rzg2l-cru: Manually track active slot number
> > You beat me to it, I had a similar patch internally.
>
> Oh that's great, I wasn't sure how this was going to be received!
>
> >
> > > media: rz2gl-cru: Return pending buffers in order
> > > media: rzg2l-cru: Remove the 'state' variable
> > > media: rzg2l-cru: Simplify irq return value handling
> > >
> > > Tommaso Merciai (2):
> > > media: rzg2l-cru: Skip ICnMC configuration when ICnSVC is used
> > > media: rzg2l-cru: Use only frame end interrupts
> > >
> > > .../platform/renesas/rzg2l-cru/rzg2l-cru-regs.h | 2 +
> > > .../media/platform/renesas/rzg2l-cru/rzg2l-cru.h | 28 +-
> > > .../media/platform/renesas/rzg2l-cru/rzg2l-video.c | 328 ++++++++-------------
> > > 3 files changed, 140 insertions(+), 218 deletions(-)
> >
> > I'll test these patches with ISP enabled next week.
>
> My testing platform is v2h with the ISP, if you have a G2L could you
> maybe give it a spin there as I don't have any board with that SoC ?
>
Sure I will.

Cheers,
Prabhakar