Re: [PATCH v2 2/3] arm64: dts: qcom: kaanpaali: Add USB support for MTP platform

[Konrad Dybcio]

On 3/29/26 7:52 PM, Krishna Kurapati wrote:
> From: Ronak Raheja <ronak.raheja@xxxxxxxxxxxxxxxx>
> 
> Enable USB support on Kaanapali MTP variant. Enable USB controller in
> device mode till glink node is added.
> 
> Signed-off-by: Ronak Raheja <ronak.raheja@xxxxxxxxxxxxxxxx>
> Signed-off-by: Jingyi Wang <jingyi.wang@xxxxxxxxxxxxxxxx>
> Signed-off-by: Krishna Kurapati <krishna.kurapati@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/kaanapali-mtp.dts | 27 ++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
> index a603f3056d83..38269aebdf03 100644
> --- a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
> @@ -82,6 +82,11 @@ key-volume-up {
>  		};
>  	};
>  
> +	pmih0108_e1_eusb2_repeater {

Huh??

You're creating a new node here - /pmih0108_e1_eusb2_repeater{}

I believe your intent was to override it by label

Konrad