Re: [PATCH v5 1/9] dt-bindings: mmc: spacemit,sdhci: add pinctrl support for voltage switching

[Krzysztof Kozlowski]

On Mon, Mar 30, 2026 at 10:38:02AM +0200, Iker Pedrosa wrote:
> Document pinctrl properties to support voltage-dependent pin
> configuration switching for UHS-I SD card modes.
> 
> Add optional pinctrl-names property with two states:
> - "default": For 3.3V operation with standard drive strength
> - "state_uhs": For 1.8V operation with optimized drive strength
> 
> These pinctrl states allow the SDHCI driver to coordinate voltage
> switching with pin configuration changes, ensuring proper signal
> integrity during UHS-I mode transitions.
> 
> Signed-off-by: Iker Pedrosa <ikerpedrosam@xxxxxxxxx>
> ---
>  .../devicetree/bindings/mmc/spacemit,sdhci.yaml         | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/spacemit,sdhci.yaml b/Documentation/devicetree/bindings/mmc/spacemit,sdhci.yaml
> index 9a055d963a7f0cdba4741c1e3e7269688dcd5f45..201ab97f0e88376a4680dcca7917e8b3172bd84a 100644
> --- a/Documentation/devicetree/bindings/mmc/spacemit,sdhci.yaml
> +++ b/Documentation/devicetree/bindings/mmc/spacemit,sdhci.yaml
> @@ -44,6 +44,20 @@ properties:
>        - const: axi
>        - const: sdh
>  
> +  pinctrl-names:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      enum:

No, that's not enum but list. Look here:

> +        - default
> +        - state_uhs

Instead: uhs

> +
> +  pinctrl-0:
> +    description: Default pinctrl state for 3.3V operation

So first item must be default, not uhs

Best regards,
Krzysztof