Re: [PATCH v4 2/5] media: iris: Add hardware power on/off ops for X1P42100

[Dikshita Agarwal]

On 4/1/2026 3:54 PM, Wangao Wang wrote:
> On X1P42100 the Iris block has an extra BSE clock. Wire this clock into
> the power on/off sequence.
> 
> The BSE clock is used to drive the Bin Stream Engine, which is a sub-block
> of the video codec hardware responsible for bitstream-level processing. It
> is required to be enabled separately from the core clock to ensure proper
> codec operation.
> 
> Signed-off-by: Wangao Wang <wangao.wang@xxxxxxxxxxxxxxxx>
> ---
>  drivers/media/platform/qcom/iris/iris_vpu3x.c      | 46 ++++++++++++++++++++++
>  drivers/media/platform/qcom/iris/iris_vpu_common.h |  1 +
>  2 files changed, 47 insertions(+)
> 
> diff --git a/drivers/media/platform/qcom/iris/iris_vpu3x.c b/drivers/media/platform/qcom/iris/iris_vpu3x.c
> index fe4423b951b1e9e31d06dffc69d18071cc985731..e6a62b3ca78efeefa2eed267636789a6b405689f 100644
> --- a/drivers/media/platform/qcom/iris/iris_vpu3x.c
> +++ b/drivers/media/platform/qcom/iris/iris_vpu3x.c
> @@ -71,6 +71,44 @@ static void iris_vpu3_power_off_hardware(struct iris_core *core)
>  	iris_vpu_power_off_hw(core);
>  }
>  
> +static int iris_vpu3_purwa_power_on_hw(struct iris_core *core)
> +{
> +	int ret;
> +
> +	ret = iris_enable_power_domains(core, core->pmdomain_tbl->pd_devs[IRIS_HW_POWER_DOMAIN]);
> +	if (ret)
> +		return ret;
> +
> +	ret = iris_prepare_enable_clock(core, IRIS_HW_CLK);
> +	if (ret)
> +		goto err_disable_power;
> +
> +	ret = iris_prepare_enable_clock(core, IRIS_BSE_HW_CLK);
> +	if (ret)
> +		goto err_disable_hw_clock;
> +
> +	ret = dev_pm_genpd_set_hwmode(core->pmdomain_tbl->pd_devs[IRIS_HW_POWER_DOMAIN], true);
> +	if (ret)
> +		goto err_disable_bse_hw_clock;
> +
> +	return 0;
> +
> +err_disable_bse_hw_clock:
> +	iris_disable_unprepare_clock(core, IRIS_BSE_HW_CLK);
> +err_disable_hw_clock:
> +	iris_disable_unprepare_clock(core, IRIS_HW_CLK);
> +err_disable_power:
> +	iris_disable_power_domains(core, core->pmdomain_tbl->pd_devs[IRIS_HW_POWER_DOMAIN]);
> +
> +	return ret;
> +}
> +
> +static void iris_vpu3_purwa_power_off_hardware(struct iris_core *core)
> +{
> +	iris_vpu3_power_off_hardware(core);

this will eventually call iris_vpu_power_off_hw which would try to disable
IRIS_HW_AHB_CLK which is not applicable to purwa I think, will that not
create any issue?

Other than this, change LGTM.

Thanks,
Dikshita
> +	iris_disable_unprepare_clock(core, IRIS_BSE_HW_CLK);
> +}
> +
>  static void iris_vpu33_power_off_hardware(struct iris_core *core)
>  {
>  	bool handshake_done = false, handshake_busy = false;
> @@ -268,6 +306,14 @@ const struct vpu_ops iris_vpu3_ops = {
>  	.calc_freq = iris_vpu3x_vpu4x_calculate_frequency,
>  };
>  
> +const struct vpu_ops iris_vpu3_purwa_ops = {
> +	.power_off_hw = iris_vpu3_purwa_power_off_hardware,
> +	.power_on_hw = iris_vpu3_purwa_power_on_hw,
> +	.power_off_controller = iris_vpu_power_off_controller,
> +	.power_on_controller = iris_vpu_power_on_controller,
> +	.calc_freq = iris_vpu3x_vpu4x_calculate_frequency,
> +};
> +
>  const struct vpu_ops iris_vpu33_ops = {
>  	.power_off_hw = iris_vpu33_power_off_hardware,
>  	.power_on_hw = iris_vpu_power_on_hw,
> diff --git a/drivers/media/platform/qcom/iris/iris_vpu_common.h b/drivers/media/platform/qcom/iris/iris_vpu_common.h
> index f6dffc613b822341fb21e12de6b1395202f62cde..88a23cbdc06c5b38b4c8db67718cbd538f0e0721 100644
> --- a/drivers/media/platform/qcom/iris/iris_vpu_common.h
> +++ b/drivers/media/platform/qcom/iris/iris_vpu_common.h
> @@ -10,6 +10,7 @@ struct iris_core;
>  
>  extern const struct vpu_ops iris_vpu2_ops;
>  extern const struct vpu_ops iris_vpu3_ops;
> +extern const struct vpu_ops iris_vpu3_purwa_ops;
>  extern const struct vpu_ops iris_vpu33_ops;
>  extern const struct vpu_ops iris_vpu35_ops;
>  extern const struct vpu_ops iris_vpu4x_ops;
>