[PATCH v4 0/4] Add framebuffer on Xiaomi Poco F1 and disable the MDSS on tianma panel variant

[David Heidelberg via B4 Relay]

Enable framebuffer for early console output.

Due to broken panel driver on tianma and no visual output it's better
to disable the MDSS so the framebuffer stays on. 

In case second patch gets rejected, please apply the first one standalone

Signed-off-by: Petr Hodina <petr.hodina@xxxxxxxxxxxxxx>
---
Changes in v4:
- Stripped too many labels, OnePlus 6 does use the label in the OP6/OP6T
  variants. Re-add.
- Link to v3: https://lore.kernel.org/r/20260401-beryllium-fb-v3-0-ec7d443402ab@xxxxxxx

Changes in v3:
- Strip label from framebuffer nodes where unused and remove -0 postfix. (Konrad)
- Link to v2: https://lore.kernel.org/r/20260317-beryllium-fb-v2-0-36b69dfb760c@xxxxxxx

Changes in v2:
- Added few conversion to use memory-region.
- Corrected framebuffer node name. (Konrad)
- Link to v1: https://lore.kernel.org/r/20260311-beryllium-fb-v1-0-408a580d125e@xxxxxxx

---
David Heidelberg (3):
      arm64: dts: qcom: sdm845-oneplus: Drop address from framebuffer node
      arm64: dts: qcom: sdm845-shift-axolotl: Convert fb to use memory-region
      arm64: dts: qcom: sdm845-samsung-starqltechn: Convert fb to use memory-region

Petr Hodina (1):
      arm64: dts: qcom: sdm845-xiaomi-beryllium: Introduce framebuffer

 arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi      |  2 +-
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts  |  7 ++++---
 arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts        |  8 ++++----
 .../boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi    | 16 ++++++++++++++++
 4 files changed, 25 insertions(+), 8 deletions(-)
---
base-commit: bd0f139e5fc11182777b81cefc3893ea508544ec
change-id: 20260107-beryllium-fb-d3e87bc20be0

Best regards,
-- 
David Heidelberg <david@xxxxxxx>