[PATCH 2/2] gpio: zynq: Add eio gpio support

[Shubhrajyoti Datta]

Add support for the EIO GPIO controller found on
xa2ve3288 silicon.

The EIO GPIO block provides access to multiplexed I/O pins exposed
through the EIO interface. Only bank 0 and bank 1 are connected to
external MIO pins, with 26 GPIOs per bank (52 GPIOs total). This
change extends the Zynq GPIO driver to support the EIO GPIO
variant.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxx>
---

 drivers/gpio/gpio-zynq.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index 571e366624d2..8118ae3412c2 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -25,6 +25,7 @@
 #define VERSAL_GPIO_MAX_BANK	4
 #define PMC_GPIO_MAX_BANK	5
 #define VERSAL_UNUSED_BANKS	2
+#define EIO_GPIO_MAX_BANK	2
 
 #define ZYNQ_GPIO_BANK0_NGPIO	32
 #define ZYNQ_GPIO_BANK1_NGPIO	22
@@ -818,6 +819,16 @@ static const struct dev_pm_ops zynq_gpio_dev_pm_ops = {
 	RUNTIME_PM_OPS(zynq_gpio_runtime_suspend, zynq_gpio_runtime_resume, NULL)
 };
 
+static const struct zynq_platform_data eio_gpio_def = {
+	.label = "eio_gpio",
+	.ngpio = 52,
+	.max_bank = EIO_GPIO_MAX_BANK,
+	.bank_min[0] = 0,
+	.bank_max[0] = 25, /* 0 to 25 are connected to MIOs (26 pins) */
+	.bank_min[1] = 26,
+	.bank_max[1] = 51, /* Bank 1 are connected to MIOs (26 pins) */
+};
+
 static const struct zynq_platform_data versal_gpio_def = {
 	.label = "versal_gpio",
 	.quirks = GPIO_QUIRK_VERSAL,
@@ -882,6 +893,7 @@ static const struct of_device_id zynq_gpio_of_match[] = {
 	{ .compatible = "xlnx,zynqmp-gpio-1.0", .data = &zynqmp_gpio_def },
 	{ .compatible = "xlnx,versal-gpio-1.0", .data = &versal_gpio_def },
 	{ .compatible = "xlnx,pmc-gpio-1.0", .data = &pmc_gpio_def },
+	{ .compatible = "xlnx,eio-gpio-1.0", .data = &eio_gpio_def },
 	{ /* end of table */ }
 };
 MODULE_DEVICE_TABLE(of, zynq_gpio_of_match);
-- 
2.34.1