[PATCH v2 2/4] ARM: dts: qcom: msm8974pro-htc-m8: add NFC support

[Alexandre Messier via B4 Relay]

From: Alexandre Messier <alex@xxxxxxxxxxxx>

Add the NFC chip used in the HTC One M8 to its device tree.

The downstream vendor kernel used an I2C frequency of 384 kHz
for this bus. Use the same value as the vendor.

Signed-off-by: Alexandre Messier <alex@xxxxxxxxxxxx>
---
 arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
index 37df271dbdeb..f24882dbeef3 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
@@ -65,6 +65,22 @@ vreg_vph_pwr: vreg-vph-pwr {
 	};
 };
 
+&blsp1_i2c3 {
+	clock-frequency = <384000>;
+
+	status = "okay";
+
+	nfc@28 {
+		compatible = "nxp,pn544-i2c";
+		reg = <0x28>;
+
+		interrupts-extended = <&tlmm 144 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+		firmware-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &pm8941_lpg {
 	qcom,power-source = <1>;
 

-- 
2.53.0