[PATCH 1/3] arm64: tegra: Correct Tegra194 p2972 interrupt flags
From: Krzysztof Kozlowski
Date: Mon Apr 06 2026 - 02:49:53 EST
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 => IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 => IRQ_TYPE_EDGE_RISING
Realtek RT5658 codec driver requests interrupt on both edges, so correct
the interrupt flags, assuming the author of the code wanted the similar
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_HIGH => IRQ_TYPE_EDGE_RISING
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index ea6f397a2792..5462200f1176 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -2170,7 +2170,7 @@ rt5658: audio-codec@1a {
compatible = "realtek,rt5658";
reg = <0x1a>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA194_MAIN_GPIO(S, 5) GPIO_ACTIVE_HIGH>;
+ interrupts = <TEGRA194_MAIN_GPIO(S, 5) IRQ_TYPE_EDGE_RISING>;
clocks = <&bpmp TEGRA194_CLK_AUD_MCLK>;
clock-names = "mclk";
realtek,jd-src = <2>;
--
2.51.0