Re: [PATCH v6 2/2] dt-bindings: embedded-controller: Add synology microp devices

[Krzysztof Kozlowski]

On Sun, Apr 05, 2026 at 07:36:29PM +0200, Markus Probst wrote:
> Add the Synology Microp devicetree bindings. Those devices are
> microcontrollers found on Synology NAS devices. They are connected to a
> serial port on the host device.
> 
> Those devices are used to control certain LEDs, fan speeds, a beeper, to
> handle buttons, fan failures and to properly shutdown and reboot the
> device.
> 
> This includes the following compatible ids:
>  - synology,ds923p-microp
>  - synology,ds918p-microp
>  - synology,ds214play-microp
>  - synology,ds225p-microp
>  - synology,ds425p-microp
>  - synology,ds710p-microp
>  - synology,ds1010p-microp
>  - synology,ds723p-microp
>  - synology,ds1522p-microp
>  - synology,rs422p-microp
>  - synology,ds725p-microp
>  - synology,ds118-microp
>  - synology,ds124-microp
>  - synology,ds223-microp
>  - synology,ds223j-microp
>  - synology,ds1823xsp-microp
>  - synology,rs822p-microp
>  - synology,rs1221p-microp
>  - synology,rs1221rpp-microp
>  - synology,ds925p-microp
>  - synology,ds1525p-microp
>  - synology,ds1825p-microp

Drop, we see this in the diff.

> 
> Signed-off-by: Markus Probst <markus.probst@xxxxxxxxx>
> ---
>  .../synology,ds923p-microp.yaml                    | 112 +++++++++++++++++++++
>  MAINTAINERS                                        |   1 +
>  2 files changed, 113 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/embedded-controller/synology,ds923p-microp.yaml b/Documentation/devicetree/bindings/embedded-controller/synology,ds923p-microp.yaml
> new file mode 100644
> index 000000000000..4518e9b74be1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/embedded-controller/synology,ds923p-microp.yaml
> @@ -0,0 +1,112 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/embedded-controller/synology,ds923p-microp.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Synology NAS on-board Microcontroller
> +
> +maintainers:
> +  - Markus Probst <markus.probst@xxxxxxxxx>
> +
> +description: |
> +  Synology Microp is a microcontroller found in Synology NAS devices.
> +  It is connected to a serial port on the host device.
> +
> +  It is necessary to properly shutdown and reboot the NAS device and
> +  provides additional functionality such as led control, fan speed control,
> +  a beeper and buttons on the NAS device.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - synology,ds923p-microp
> +      - synology,ds918p-microp
> +      - synology,ds214play-microp
> +      - synology,ds225p-microp
> +      - synology,ds425p-microp
> +      - synology,ds710p-microp
> +      - synology,ds1010p-microp
> +      - synology,ds723p-microp
> +      - synology,ds1522p-microp
> +      - synology,rs422p-microp
> +      - synology,ds725p-microp
> +      - synology,ds118-microp
> +      - synology,ds124-microp
> +      - synology,ds223-microp
> +      - synology,ds223j-microp
> +      - synology,ds1823xsp-microp
> +      - synology,rs822p-microp
> +      - synology,rs1221p-microp
> +      - synology,rs1221rpp-microp
> +      - synology,ds925p-microp
> +      - synology,ds1525p-microp
> +      - synology,ds1825p-microp

So we already talked about this and you were told to use compatibility.
Your driver clearly states several of these are compatible, so I am
confused that I do not see it expressed here.

> +
> +  fan-failure-gpios:
> +    description: GPIOs needed to determine which fans stopped working on a fan failure event.
> +    minItems: 2
> +    maxItems: 3
> +
> +required:
> +  - compatible
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - synology,ds214play-microp
> +              - synology,ds225p-microp
> +              - synology,ds710p-microp
> +              - synology,ds723p-microp
> +              - synology,ds725p-microp
> +              - synology,ds118-microp
> +              - synology,ds124-microp
> +              - synology,ds223-microp
> +              - synology,ds223j-microp
> +              - synology,ds1823xsp-microp
> +              - synology,rs822p-microp
> +              - synology,rs1221p-microp
> +              - synology,rs1221rpp-microp
> +              - synology,ds1825p-microp
> +    then:
> +      properties:
> +        fan-failure-gpios: false
> +    else:
> +      required:
> +        - fan-failure-gpios
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/leds/common.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    embedded-controller {
> +      compatible = "synology,ds923p-microp";
> +
> +      fan-failure-gpios = <&gpio 68 GPIO_ACTIVE_HIGH>, <&gpio 69 GPIO_ACTIVE_HIGH>;

Keep only one example, they are basically the same. Difference in one
property does not need a new example.

Best regards,
Krzysztof