[PATCH v5 4/5] iio: ssp_sensors: use devm APIs for mutex and IRQ resources

[Sanjay Chitroda]

From: Sanjay Chitroda <sanjayembeddedse@xxxxxxxxx>

Convert mutex initialization and IRQ registration to use devm-managed
helpers, tying their lifetime to the device.

This removes the need for explicit cleanup in the error and remove
paths, as the resources are automatically released on probe failure
or device unbind.

Signed-off-by: Sanjay Chitroda <sanjayembeddedse@xxxxxxxxx>
---
 drivers/iio/common/ssp_sensors/ssp_dev.c | 36 +++++++++++-------------
 1 file changed, 17 insertions(+), 19 deletions(-)

diff --git a/drivers/iio/common/ssp_sensors/ssp_dev.c b/drivers/iio/common/ssp_sensors/ssp_dev.c
index da09c9f3ceb6..f4fc869fc770 100644
--- a/drivers/iio/common/ssp_sensors/ssp_dev.c
+++ b/drivers/iio/common/ssp_sensors/ssp_dev.c
@@ -510,7 +510,11 @@ static int ssp_probe(struct spi_device *spi)
 	data->spi = spi;
 	spi_set_drvdata(spi, data);
 
-	mutex_init(&data->comm_lock);
+	ret = devm_mutex_init(&spi->dev, &data->comm_lock);
+	if (ret < 0) {
+		dev_err(&spi->dev, "Failed to init comm_lock mutex\n");
+		goto err_setup_spi;
+	}
 
 	for (i = 0; i < SSP_SENSOR_MAX; ++i) {
 		data->delay_buf[i] = SSP_DEFAULT_POLLING_DELAY;
@@ -523,7 +527,11 @@ static int ssp_probe(struct spi_device *spi)
 
 	data->time_syncing = true;
 
-	mutex_init(&data->pending_lock);
+	ret = devm_mutex_init(&spi->dev, &data->pending_lock);
+	if (ret < 0) {
+		dev_err(&spi->dev, "Failed to init pending_lock mutex\n");
+		goto err_setup_spi;
+	}
 	INIT_LIST_HEAD(&data->pending_list);
 
 	atomic_set(&data->enable_refcount, 0);
@@ -533,13 +541,13 @@ static int ssp_probe(struct spi_device *spi)
 
 	timer_setup(&data->wdt_timer, ssp_wdt_timer_func, 0);
 
-	ret = request_threaded_irq(data->spi->irq, NULL,
-				   ssp_irq_thread_fn,
-				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-				   "SSP_Int", data);
+	ret = devm_request_threaded_irq(&spi->dev, data->spi->irq, NULL,
+					ssp_irq_thread_fn,
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					"SSP_Int", data);
 	if (ret < 0) {
 		dev_err(&spi->dev, "Irq request fail\n");
-		goto err_setup_irq;
+		goto err_setup_spi;
 	}
 
 	/* Let's start with enabled one so irq balance could be ok */
@@ -553,21 +561,16 @@ static int ssp_probe(struct spi_device *spi)
 		ret = ssp_initialize_mcu(data);
 		if (ret < 0) {
 			dev_err(&spi->dev, "Initialize_mcu failed\n");
-			goto err_read_reg;
+			goto err_setup_spi;
 		}
 	} else {
 		dev_err(&spi->dev, "Firmware version not supported\n");
 		ret = -EPERM;
-		goto err_read_reg;
+		goto err_setup_spi;
 	}
 
 	return 0;
 
-err_read_reg:
-	free_irq(data->spi->irq, data);
-err_setup_irq:
-	mutex_destroy(&data->pending_lock);
-	mutex_destroy(&data->comm_lock);
 err_setup_spi:
 	mfd_remove_devices(&spi->dev);
 
@@ -589,14 +592,9 @@ static void ssp_remove(struct spi_device *spi)
 
 	ssp_clean_pending_list(data);
 
-	free_irq(data->spi->irq, data);
-
 	timer_delete_sync(&data->wdt_timer);
 	cancel_work_sync(&data->work_wdt);
 
-	mutex_destroy(&data->comm_lock);
-	mutex_destroy(&data->pending_lock);
-
 	mfd_remove_devices(&spi->dev);
 }
 
-- 
2.34.1