[PATCH] arm64: dts: qcom: fix temp-alarm probe failure for PMH0104 on Glymur

[Kamal Wadhwa]

The temp-alarm driver probe is failing for the pmh0104 PMICs on glymur.

[    3.999713] spmi-temp-alarm c426000.spmi:pmic@8:temp-alarm@a00: error -ENODEV: failed to register sensor
[    4.015066] spmi-temp-alarm c426000.spmi:pmic@9:temp-alarm@a00: error -ENODEV: failed to register sensor
[    4.033908] spmi-temp-alarm c437000.spmi:pmic@b:temp-alarm@a00: error -ENODEV: failed to register sensor

This happens because thermal zone associated with the temp alarm was
defined under the thermal zones parent node which had a typo (used `_` in
place of `-`). Correct the typo to fix probe failure.

Fixes: 41b6e8db400c ("arm64: dts: qcom: Introduce Glymur base dtsi")
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/pmh0104-glymur.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/pmh0104-glymur.dtsi b/arch/arm64/boot/dts/qcom/pmh0104-glymur.dtsi
index 7a1e5f355c175913a38d536a1ca13d870049b741..6b4747025b9f85d5fe58ee6ecfbe8d07b38d29fd 100644
--- a/arch/arm64/boot/dts/qcom/pmh0104-glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmh0104-glymur.dtsi
@@ -7,7 +7,7 @@
 #include <dt-bindings/spmi/spmi.h>
 
 /{
-	thermal_zones {
+	thermal-zones {
 		pmh0104_i0_thermal: pmh0104-i0-thermal {
 			polling-delay-passive = <100>;
 			thermal-sensors = <&pmh0104_i_e0_temp_alarm>;

---
base-commit: bd0f139e5fc11182777b81cefc3893ea508544ec
change-id: 20260401-glymur-pmh0104-temp-alarm-fix-72e6c1080d6e

Best regards,
-- 
Kamal Wadhwa <kamal.wadhwa@xxxxxxxxxxxxxxxx>