Re: [PATCH 2/3] arm64: dts: imx8mn-vhip4-evalboard-v2: Correct interrupt flags

[Marek Vasut]

On 4/6/26 8:38 AM, Krzysztof Kozlowski wrote:
> GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
> These are simple defines so they could be used in DTS but they will not
> have the same meaning:
> 1. GPIO_ACTIVE_HIGH = 0 => IRQ_TYPE_NONE
> 2. GPIO_ACTIVE_LOW  = 1 => IRQ_TYPE_EDGE_RISING
>
> Correct the interrupt flags, assuming the author of the code wanted the
> same logical behavior behind the name "ACTIVE_xxx", this is:
> ACTIVE_LOW  => IRQ_TYPE_LEVEL_LOW
>
> Fixes: 5eb7405db99b ("arm64: dts: imx8mn: Add ifm VHIP4 EvalBoard v1 and v2")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx>

Reviewed-by: Marek Vasut <marex@xxxxxxxxxxxx>