[PATCH 0/2] pwm: clk-pwm: Add GPIO support for constant output levels

[Xilin Wu]

The clk-pwm driver uses a clock with duty cycle control to generate
PWM output. However, when the PWM is disabled or a 0%/100% duty cycle
is requested, the clock must be stopped, and the resulting pin level
is undefined and hardware-dependent.

This series adds optional GPIO and pinctrl support to the clk-pwm
driver. When a GPIO and pinctrl states ("default" for clock mux,
"gpio" for GPIO mode) are provided in the device tree, the driver
switches the pin to GPIO mode and drives a deterministic output level
for disabled/0%/100% states. For normal PWM output the pin is switched
back to its clock function mux. If no GPIO is provided, the driver
falls back to the original clock-only behavior.

Signed-off-by: Xilin Wu <sophon@xxxxxxxxx>
---
Xilin Wu (2):
      dt-bindings: pwm: clk-pwm: add optional GPIO and pinctrl properties
      pwm: clk-pwm: add GPIO and pinctrl support for constant output levels

 Documentation/devicetree/bindings/pwm/clk-pwm.yaml | 36 ++++++++++-
 drivers/pwm/pwm-clk.c                              | 72 ++++++++++++++++++++--
 2 files changed, 101 insertions(+), 7 deletions(-)
---
base-commit: 2febe6e6ee6e34c7754eff3c4d81aa7b0dcb7979
change-id: 20260406-clk-pwm-gpio-7f63b38908a5

Best regards,
--  
Xilin Wu <sophon@xxxxxxxxx>