[PATCH v3 3/3] arm64: dts: qcom: kaanpaali: Add USB support for QRD platform

[Krishna Kurapati]

From: Ronak Raheja <ronak.raheja@xxxxxxxxxxxxxxxx>

Enable USB support on Kaanapali QRD variant. Enable USB controller in
device mode till glink node is added.

Signed-off-by: Ronak Raheja <ronak.raheja@xxxxxxxxxxxxxxxx>
Signed-off-by: Jingyi Wang <jingyi.wang@xxxxxxxxxxxxxxxx>
Signed-off-by: Krishna Kurapati <krishna.kurapati@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/kaanapali-qrd.dts | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts b/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts
index da0e8f9091c3..55d02219ef4e 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts
@@ -744,6 +744,11 @@ led@3 {
 	};
 };
 
+&pmih0108_e1_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
 &pon_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 
@@ -816,3 +821,25 @@ &ufs_mem_phy {
 
 	status = "okay";
 };
+
+&usb {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l4f_0p8>;
+	vdda12-supply = <&vreg_l1d_1p2>;
+
+	phys = <&pmih0108_e1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l1d_1p2>;
+	vdda-pll-supply = <&vreg_l4f_0p8>;
+
+	status = "okay";
+};
-- 
2.34.1