Re: [PATCH net-next v5 00/10] Decouple receive and transmit enablement in team driver

[Marc Harvey]

On Mon, Apr 6, 2026 at 7:44 AM Jakub Kicinski <kuba@xxxxxxxxxx> wrote:
>
> On Mon, 06 Apr 2026 03:03:36 +0000 Marc Harvey wrote:
> > Allow independent control over receive and transmit enablement states
> > for aggregated ports in the team driver.
> >
> > The motivation is that IEE 802.3ad LACP "independent control" can't
> > be implemented for the team driver currently. This was added to the
> > bonding driver in commit 240fd405528b ("bonding: Add independent
> > control state machine").
> >
> > This series also has a few patches that add tests to show that the old
> > coupled enablement still works and that the new decoupled enablement
> > works as intended (4, 5, and 10).
> >
> > There are three patches with small fixes as well, with the goal of
> > making the final decoupling patch clearer (1, 2, and 3).
>
> activebackup:
>
> TAP version 13
> 1..1
> # overriding timeout to 2400
> # selftests: drivers/net/team: teamd_activebackup.sh
> # Setting up two-link aggregation for runner activebackup
> # Teamd version is: teamd 1.32
> # Conf files are /tmp/tmp.ydjNK9Um7H and /tmp/tmp.xZuc3cWbN0
> # This program is not intended to be run as root.
> # This program is not intended to be run as root.
> # Created team devices
> # Teamd PIDs are 21457 and 21461
> # exec of "ip link set eth0 up" failed: No such file or directory
> # exec of "ip link set eth0 up" failed: No such file or directory
> # exec of "ip link set eth1 up" failed: No such file or directory
> # exec of "ip link set eth1 up" failed: No such file or directory
> # PING fd00::2 (fd00::2) 56 data bytes
> # 64 bytes from fd00::2: icmp_seq=1 ttl=64 time=0.753 ms
> #
> # --- fd00::2 ping statistics ---
> # 1 packets transmitted, 1 received, 0% packet loss, time 0ms
> # rtt min/avg/max/mdev = 0.753/0.753/0.753/0.000 msPacket count for test_team2 was 0
> # Waiting for eth0 in ns2-lZ0gqd to stop receiving
> # Packet count for eth0 was 0Packet count for eth0 was 0
> # Packet count for eth1 was 0
> # Waiting for eth1 in ns2-lZ0gqd to stop receiving
> # Packet count for eth1 was 0Packet count for eth0 was 0
> # Packet count for eth1 was 0
> # TEST: teamd active backup runner test                               [FAIL]
> # Traffic did not reach team interface in NS2.
> # Tearing down two-link aggregation
> # Failed to kill daemon: Timer expired
> # Failed to kill daemon: Timer expired
> # Sending sigkill to teamd for test_team1
> # rm: cannot remove '/var/run/teamd/test_team1.pid': No such file or directory
> # rm: cannot remove '/var/run/teamd/test_team1.sock': No such file or directory
> # Sending sigkill to teamd for test_team2
> # rm: cannot remove '/var/run/teamd/test_team2.pid': No such file or directory
> # rm: cannot remove '/var/run/teamd/test_team2.sock': No such file or directory
> not ok 1 selftests: drivers/net/team: teamd_activebackup.sh # exit=1
>
>
> transmit_failover:
>
> TAP version 13
> 1..1
> # overriding timeout to 2400
> # selftests: drivers/net/team: transmit_failover.sh
> # Error: ipv6: address not found.
> # Setting team in ns2-yxjiUo to mode roundrobin
> # Error: ipv6: address not found.
> # Setting team in ns1-Jht6kA to mode broadcast
> # Packet count for eth0 was 0
> # Packet count for eth1 was 0
> # Packet count for eth0 was 0
> # Packet count for eth1 was 0
> # Packet count for eth0 was 0
> # Packet count for eth1 was 0
> # TEST: Failover of 'broadcast' test                                  [FAIL]
> # eth0 not transmitting when both links enabled
> # Setting team in ns1-Jht6kA to mode roundrobin
> # Packet count for eth0 was 0
> # Packet count for eth1 was 0
> # Packet count for eth0 was 0
> # Packet count for eth1 was 0
> # Packet count for eth0 was 0
> # Packet count for eth1 was 0
> # TEST: Failover of 'roundrobin' test                                 [FAIL]
> # eth0 not transmitting when both links enabled
> # Setting team in ns1-Jht6kA to mode random
> # Packet count for eth0 was 0
> # Packet count for eth1 was 0
> # Packet count for eth0 was 0
> # Packet count for eth1 was 0
> # Packet count for eth0 was 0
> # Packet count for eth1 was 0
> # TEST: Failover of 'random' test                                     [FAIL]
> # eth0 not transmitting when both links enabled
> not ok 1 selftests: drivers/net/team: transmit_failover.sh # exit=1
> --
> pw-bot: cr

Apologies for all of the test failures. Before sending this revision,
I ran each test thousands of times and observed no failures, so I
thought the flakiness would be resolved.

No matter what I try, I can't recreate either issue on my end. I've
tried building with the exact config from one of the test runs
(https://netdev-ctrl.bots.linux.dev/logs/vmksft/bonding/results/590921/).
I've tried stressing the VM according to
https://github.com/linux-netdev/nipa/wiki/How-to-run-netdev-selftests-CI-style#reproducing-unstable-tests
(this makes the tests time out, but I can still see traffic). I've
tried using the netdev-testing/net-next-2026-04-06--09-00 kernel
source. I've tried in nested and unnested virtual machines. I've also
tried running multiple test instances in parallel, but nothing
recreates the issues. The issues seem related to tcpdump, but without
reproducing them, I can only guess. Any suggestions for running the
tests exactly as the CI does would be greatly appreciated.

- Marc