Re: [PATCH] arm64: dts: imx93-9x9-qsb: Add tianma,tm050rdh03 panel

[Liu Ying]

On Wed, Apr 08, 2026 at 03:58:59AM -0400, Frank Li wrote:
> On Wed, Apr 08, 2026 at 02:02:54PM +0800, Liu Ying wrote:
>> Hi Frank,
>>
>> On Tue, Apr 07, 2026 at 05:55:29AM -0400, Frank Li wrote:
>>> On Tue, Apr 07, 2026 at 05:15:31PM +0800, Liu Ying wrote:
>>>> Support tianma,tm050rdh03 DPI panel on i.MX93 9x9 QSB.
>>>>
>>>> The panel connects with the QSB board through an adapter board[1]
>>>> designed by NXP.
>>>>
>>>> Link: https://www.nxp.com/design/design-center/development-boards-and-designs/parallel-lcd-display:TM050RDH03-41 [1]
>>>> Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
>>>> ---
>>>>  arch/arm64/boot/dts/freescale/Makefile             |   2 +
>>>>  .../imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtsi       | 110 +++++++++++++++++++++
>>>>  .../imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtso       | 106 +-------------------
>>>
>>> Can you add some description about raname in commit message?
>>
>> I'll add some description about the file copy in commit message.
>>
>>> Use -C option to create patch.
>>
>> Will do.
>>
>>>
>>> ...
>>>> diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-tianma-tm050rdh03.dtso b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-tianma-tm050rdh03.dtso
>>>> new file mode 100644
>>>> index 000000000000..c233797ec28c
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-tianma-tm050rdh03.dtso
>>>> @@ -0,0 +1,14 @@
>>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>>> +/*
>>>> + * Copyright 2026 NXP
>>>> + */
>>>> +
>>>> +#include <dt-bindings/gpio/gpio.h>
>>>> +#include "imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtsi"
>>>> +
>>>> +&{/} {
>>>> +	panel {
>>>> +		compatible = "tianma,tm050rdh03";
>>>> +		enable-gpios = <&pcal6524 8 GPIO_ACTIVE_HIGH>;
>>>> +	};
>>>> +};
>>>
>>> Is it possible to appply this overlay file and kd50g21-40nt-a1 overlay file
>>>
>>> to imx93-9x9-qsb.dtb, so needn't create dtsi.
>>
>> I'm sorry, I don't get your question here.
>> Anyway, the DT overlays are needed, because the 40-pin EXP/PRI interface on
>> the i.MX93 9x9 QSB board can not only connect to a DPI panel adapter board
>> but also to an audio hat[2], and maybe more.  The newly introduced .dtsi
>> file just aims to avoid duplicated code.
> 
> My means apply two overlay files to dtb
> 
> imx93-9x9-qsb-tianma-tm050rdh03-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtbo imx93-9x9-qsb-tianma-tm050rdh03.dtbo
> 
> In imx93-9x9-qsb-tianma-tm050rdh03.dtbo, only include
> &{/} {
> 	panel {
> 		compatible = "tianma,tm050rdh03";
> 		enable-gpios = <&pcal6524 8 GPIO_ACTIVE_HIGH>;
> 	};
> };

If an user wants to use imx93-9x9-qsb.dtb and the DT overlay blob
imx93-9x9-qsb-tianma-tm050rdh03.dtbo to enable the tianma,tm050rdh03
DPI panel, then it won't work unless the user also apply
imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtbo, right?

> 
> Frank
>>
>> [2] https://www.nxp.com/design/design-center/development-boards-and-designs/mx93aud-hat-audio-board:MX93AUD-HAT
>>
>>>
>>> Frank
>>>>
>>>> ---
>>>> base-commit: 816f193dd0d95246f208590924dd962b192def78
>>>> change-id: 20260407-tianma-tm050rdh03-imx93-9x9-qsb-6e4bbbde3d08
>>>>
>>>> Best regards,
>>>> --
>>>> Liu Ying <victor.liu@xxxxxxx>
>>>>
>>
>> --
>> Regards,
>> Liu Ying

-- 
Regards,
Liu Ying