[PATCH rc v1 0/4] iommu/arm-smmu-v3: Fix device crash on kdump kernel

[Nicolin Chen]

When transitioning to a kdump kernel, the primary kernel might have crashed
while endpoint devices were actively bus-mastering DMA. Currently, the SMMU
driver aggressively resets the hardware during probe by clearing CR0_SMMUEN
and setting the Global Bypass Attribute (GBPA) to ABORT.

In a kdump scenario, this aggressive reset is highly destructive:
a) If GBPA is set to ABORT, in-flight DMA will be aborted, generating fatal
   PCIe AER or SErrors that may panic the kdump kernel
b) If GBPA is set to BYPASS, in-flight DMA targeting some IOVAs will bypass
   the SMMU and corrupt the physical memory at those 1:1 mapped IOVAs.

To safely absorb in-flight DMA, the kdump kernel must leave SMMUEN=1 intact
and avoid modifying STRTAB_BASE. This allows HW to continue translating in-
flight DMA using the crashed kernel's page tables until the endpoint device
drivers probe and quiesce their respective hardware.

However, the ARM SMMUv3 architecture specification states that updating the
SMMU_STRTAB_BASE register while SMMUEN == 1 is UNPREDICTABLE or ignored.

This leaves a kdump kernel no choice but to adopt the stream table from the
crashed kernel.

In this series:
 - Introduce an ARM_SMMU_OPT_KDUMP
 - Skip SMMUEN and STRTAB_BASE resets in arm_smmu_device_reset()
 - Map the crashed kernel's stream tables into the kdump kernel [*]
 - Defer any default domain attachment to retain STEs until device drivers
   explicitly request it.

[*] This is implemented via memremap, which only works on a coherent SMMU.

Note that the entire series requires Jason's work that was merged in v6.12:
85196f5 ("iommu/arm-smmu-v3: Reorganize struct arm_smmu_strtab_cfg").
I have a backported version that is verified with a v6.8 kernel. I can send
if we see a strong need after this version is accepted.

This is on Github:
https://github.com/nicolinc/iommufd/commits/smmuv3_kdump-v1

Nicolin Chen (4):
  iommu/arm-smmu-v3: Add arm_smmu_adopt_strtab() for kdump
  iommu/arm-smmu-v3: Implement is_attach_deferred() for kdump
  iommu/arm-smmu-v3: Retain SMMUEN during kdump device reset
  iommu/arm-smmu-v3: Detect ARM_SMMU_OPT_KDUMP in
    arm_smmu_device_hw_probe()

 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h |   1 +
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 176 +++++++++++++++++++-
 2 files changed, 174 insertions(+), 3 deletions(-)

-- 
2.43.0