Re: [PATCH v1] phy: rockchip-snps-pcie3:phy: Configure clkreq_n and PowerDown for all lanes

From: Shawn Lin

Date: Thu Apr 09 2026 - 21:02:11 EST


Hi Anand

在 2026/04/09 星期四 12:49, Anand Moon 写道:
During the rk3588_p3phy_init sequence, the driver now explicitly
configures each lane's CON0 register to ensure
- PIPE 4.3 Compliance: clkreq_n (bit 6) is forced low (asserted) to meet
sideband signal requirements.

clkreq_n is now force asserted via controller driver if supports_clkreq
is not set.

- Active Power State: PowerDown[3:0] (bits 11:8) is set to P0
(Normal Operational State) to ensure the PHY is fully powered and ready
for link training.


P0 is the nature state when linking up. I don't know why it should be P0
before we even don't know whether the device is present.

These changes ensure that all lanes are consistently transitioned from
reset into a known-good operational state, preventing undefined behavior
and ensuring the PHY is ready for high-speed data transmission.

Cc: Niklas Cassel <cassel@xxxxxxxxxx>
Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
---
.../phy/rockchip/phy-rockchip-snps-pcie3.c | 28 +++++++++++++++++--
1 file changed, 26 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
index 4e8ffd173096..f46e13e79a0e 100644
--- a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
+++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
@@ -7,6 +7,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/hw_bitfield.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/kernel.h>
@@ -35,10 +36,14 @@
#define RK3588_PCIE3PHY_GRF_CMN_CON0 0x0
#define RK3588_PCIE3PHY_GRF_PHY0_STATUS1 0x904
#define RK3588_PCIE3PHY_GRF_PHY1_STATUS1 0xa04
+#define RK3588_PCIE3PHY_GRF_PHY0_LN0_CON0 0x1000
#define RK3588_PCIE3PHY_GRF_PHY0_LN0_CON1 0x1004
#define RK3588_PCIE3PHY_GRF_PHY0_LN1_CON1 0x1104
+#define RK3588_PCIE3PHY_GRF_PHY0_LN1_CON0 0x1100
+#define RK3588_PCIE3PHY_GRF_PHY1_LN0_CON0 0x2000
#define RK3588_PCIE3PHY_GRF_PHY1_LN0_CON1 0x2004
#define RK3588_PCIE3PHY_GRF_PHY1_LN1_CON1 0x2104
+#define RK3588_PCIE3PHY_GRF_PHY1_LN1_CON0 0x2100
#define RK3588_SRAM_INIT_DONE(reg) (reg & BIT(0))
#define RK3588_BIFURCATION_LANE_0_1 BIT(0)
@@ -49,6 +54,13 @@
#define RK3588_PCIE1LN_SEL_EN (GENMASK(1, 0) << 16)
#define RK3588_PCIE30_PHY_MODE_EN (GENMASK(2, 0) << 16)
+static const u32 rk3588_lane_con0[] = {
+ RK3588_PCIE3PHY_GRF_PHY0_LN0_CON0,
+ RK3588_PCIE3PHY_GRF_PHY0_LN1_CON0,
+ RK3588_PCIE3PHY_GRF_PHY1_LN0_CON0,
+ RK3588_PCIE3PHY_GRF_PHY1_LN1_CON0,
+};
+
struct rockchip_p3phy_ops;
struct rockchip_p3phy_priv {
@@ -142,7 +154,7 @@ static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
{
u32 reg = 0;
u8 mode = RK3588_LANE_AGGREGATION; /* default */
- int ret;
+ int ret, i;
regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_PHY0_LN0_CON1,
priv->rx_cmn_refclk_mode[0] ? RK3588_RX_CMN_REFCLK_MODE_EN :
@@ -161,7 +173,7 @@ static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, BIT(8) | BIT(24));
/* Set bifurcation if needed */
- for (int i = 0; i < priv->num_lanes; i++) {
+ for (i = 0; i < priv->num_lanes; i++) {
if (priv->lanes[i] > 1)
mode &= ~RK3588_LANE_AGGREGATION;
if (priv->lanes[i] == 3)
@@ -174,6 +186,18 @@ static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0,
RK3588_PCIE30_PHY_MODE_EN | reg);
+ for (i = 0; i < priv->num_lanes && i < ARRAY_SIZE(rk3588_lane_con0); i++) {
+ u32 base = rk3588_lane_con0[i];
+
+ /* clkreq_n = 0 (asserted low for PIPE 4.3) */
+ regmap_write(priv->phy_grf, base,
+ FIELD_PREP_WM16(BIT(6), 0));
+
+ /* PowerDown = P0 (0x0, fully active) */
+ regmap_write(priv->phy_grf, base,
+ FIELD_PREP_WM16(GENMASK(11, 8), 0x0));
+ }
+
/* Set pcie1ln_sel in PHP_GRF_PCIESEL_CON */
if (!IS_ERR(priv->pipe_grf)) {
reg = mode & (RK3588_BIFURCATION_LANE_0_1 | RK3588_BIFURCATION_LANE_2_3);

base-commit: 7f87a5ea75f011d2c9bc8ac0167e5e2d1adb1594