[PATCH 3/6] gpib: Don't use extended registers
From: Dave Penkler
Date: Sat Apr 11 2026 - 13:25:59 EST
When the chip type is 72310 then avoid accessing extended registers
Apart from the BSR the 72310 supports only the standard NEC u7210
registers.
Signed-off-by: Dave Penkler <dpenkler@xxxxxxxxx>
---
drivers/gpib/ines/ines_gpib.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpib/ines/ines_gpib.c b/drivers/gpib/ines/ines_gpib.c
index dd98cb261a4c..df299a9d7f4d 100644
--- a/drivers/gpib/ines/ines_gpib.c
+++ b/drivers/gpib/ines/ines_gpib.c
@@ -103,6 +103,9 @@ static int ines_t1_delay(struct gpib_board *board, unsigned int nano_sec)
retval = nec7210_t1_delay(board, nec_priv, nano_sec);
+ if (ines_priv->pci_chip_type == PCI_CHIP_INES_72130)
+ return retval;
+
if (nano_sec <= 250) {
write_byte(nec_priv, INES_AUXD | INES_FOLLOWING_T1_250ns |
INES_INITIAL_T1_2000ns, AUXMR);
@@ -322,6 +325,8 @@ static irqreturn_t ines_interrupt(struct gpib_board *board)
spin_lock_irqsave(&board->spinlock, flags);
nec7210_interrupt(board, nec_priv);
+ if (priv->pci_chip_type == PCI_CHIP_INES_72130)
+ goto out;
isr3_bits = ines_inb(priv, ISR3);
isr4_bits = ines_inb(priv, ISR4);
if (isr3_bits & IFC_ACTIVE_BIT) {
@@ -339,6 +344,7 @@ static irqreturn_t ines_interrupt(struct gpib_board *board)
if (wake)
wake_up_interruptible(&board->wait);
+out:
spin_unlock_irqrestore(&board->spinlock, flags);
return IRQ_HANDLED;
}
--
2.53.0