[PATCH 4/6] gpib: Add ines_pci_xl_interface

[Dave Penkler]

Add new interface initialisation struct for 72130 based boards.

It is basically the same as the ines_pci_interface apart from the
name, attach and line_status fields.

Signed-off-by: Dave Penkler <dpenkler@xxxxxxxxx>
---
 drivers/gpib/ines/ines_gpib.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/gpib/ines/ines_gpib.c b/drivers/gpib/ines/ines_gpib.c
index df299a9d7f4d..118e6c7b0ff1 100644
--- a/drivers/gpib/ines/ines_gpib.c
+++ b/drivers/gpib/ines/ines_gpib.c
@@ -603,6 +603,34 @@ static struct gpib_interface ines_pci_unaccel_interface = {
 	.return_to_local = ines_return_to_local,
 };
 
+static struct gpib_interface ines_pci_xl_interface = {
+	.name = "ines_pci_xl",
+	.attach = ines_pci_xl_attach,
+	.detach = ines_pci_detach,
+	.read = ines_read,
+	.write = ines_write,
+	.command = ines_command,
+	.take_control = ines_take_control,
+	.go_to_standby = ines_go_to_standby,
+	.request_system_control = ines_request_system_control,
+	.interface_clear = ines_interface_clear,
+	.remote_enable = ines_remote_enable,
+	.enable_eos = ines_enable_eos,
+	.disable_eos = ines_disable_eos,
+	.parallel_poll = ines_parallel_poll,
+	.parallel_poll_configure = ines_parallel_poll_configure,
+	.parallel_poll_response = ines_parallel_poll_response,
+	.local_parallel_poll_mode = NULL, // XXX
+	.line_status = ines72130_line_status,
+	.update_status = ines_update_status,
+	.primary_address = ines_primary_address,
+	.secondary_address = ines_secondary_address,
+	.serial_poll_response = ines_serial_poll_response,
+	.serial_poll_status = ines_serial_poll_status,
+	.t1_delay = ines_t1_delay,
+	.return_to_local = ines_return_to_local,
+};
+
 static struct gpib_interface ines_pci_interface = {
 	.name = "ines_pci",
 	.attach = ines_pci_accel_attach,
-- 
2.53.0