[PATCH v3 0/5] Add OneXPlayer Configuration HID Driver

[Derek J. Clark]

Adds an HID driver for OneXPlayer HID configuration devices. There are
currently 2 generations of OneXPlayer HID protocol. The first (OneXPlayer
F1 series) only provides an RGB control interface over HID. The Second
(X1 mini series, G1 series, AOKZOE A1X) also includes a hardware level
button mapping interface, vibration intensity settings, and the ability
to switch output between xinput and a debug mode that can be used to debug
the button mapping. Some devices (G1 Series, APEX) use a hybrid of Gen1
RGB control and Gen 2 controller settings. To ensure there is no conflicts
when the driver is loaded, we skip creating the RGB interface for Gen 2
devices if there is a DMI match.

I'll also add a note that Gen 1 devices also have an interface for
setting the key map and debug mode, but that is done entirely over a
serial TTY device so it is not able to be added to this driver. There
are also some "Gen 0" devices (OneXPlayer 2 Series) also use it, but
the TTY interface also handles the RGB control so no support is
provided by this driver for those interfaces.

Signed-off-by: Derel J. Clark <derekjohn.clark@xxxxxxxxx>

Derek J. Clark (5):
  HID: hid-oxp: Add OneXPlayer configuration driver
  HID: hid-oxp: Add Second Generation RGB Control
  HID: hid-oxp: Add Second Generation Gamepad Mode Switch
  HID: hid-oxp: Add Button Mapping Interface
  HID: hid-oxp: Add Vibration Intensity Attributes

 MAINTAINERS           |    6 +
 drivers/hid/Kconfig   |   13 +
 drivers/hid/Makefile  |    1 +
 drivers/hid/hid-ids.h |    6 +
 drivers/hid/hid-oxp.c | 1575 +++++++++++++++++++++++++++++++++++++++++
 5 files changed, 1601 insertions(+)
 create mode 100644 drivers/hid/hid-oxp.c

-- 
2.53.0