[PATCH 09/10] drm: zynqmp_dp: switch to of_drm_get_bridge_by_endpoint()

[Luca Ceresoli]

This driver calls drm_of_find_panel_or_bridge() with a NULL pointer in the
@panel parameter, thus using a reduced feature set of that function.
Replace this call with the simpler of_drm_get_bridge_by_endpoint().

Since of_drm_get_bridge_by_endpoint() increases the refcount of the
returned bridge, ensure it is put on removal. To achieve this, instead of
adding an explicit drm_bridge_put(), migrate to the bridge::next_bridge
pointer which is automatically put when the bridge is eventually freed.

Signed-off-by: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
---
 drivers/gpu/drm/xlnx/zynqmp_dp.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c
index 379180fb3004..87a57abcfaef 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
@@ -353,7 +353,6 @@ struct zynqmp_dp_train_set_priv {
  * @lock: Mutex protecting this struct and register access (but not AUX)
  * @irq: irq
  * @bridge: DRM bridge for the DP encoder
- * @next_bridge: The downstream bridge
  * @test: Configuration for test mode
  * @config: IP core configuration from DTS
  * @aux: aux channel
@@ -385,7 +384,6 @@ struct zynqmp_dp {
 	struct completion aux_done;
 	struct mutex lock;
 
-	struct drm_bridge *next_bridge;
 	struct device *dev;
 	struct zynqmp_dpsub *dpsub;
 	void __iomem *iomem;
@@ -1494,8 +1492,8 @@ static int zynqmp_dp_bridge_attach(struct drm_bridge *bridge,
 		return ret;
 	}
 
-	if (dp->next_bridge) {
-		ret = drm_bridge_attach(encoder, dp->next_bridge,
+	if (dp->bridge.next_bridge) {
+		ret = drm_bridge_attach(encoder, dp->bridge.next_bridge,
 					bridge, flags);
 		if (ret < 0)
 			goto error;
@@ -2461,8 +2459,8 @@ int zynqmp_dp_probe(struct zynqmp_dpsub *dpsub)
 	 * Acquire the next bridge in the chain. Ignore errors caused by port@5
 	 * not being connected for backward-compatibility with older DTs.
 	 */
-	ret = drm_of_find_panel_or_bridge(dp->dev->of_node, 5, 0, NULL,
-					  &dp->next_bridge);
+	ret = of_drm_get_bridge_by_endpoint(dp->dev->of_node, 5, 0,
+					    &dp->bridge.next_bridge);
 	if (ret < 0 && ret != -ENODEV)
 		goto err_reset;
 

-- 
2.53.0