Re: [PATCH 06/11] media: iris: Fix VM count passed to firmware

[Mukesh Ojha]

On Tue, Apr 14, 2026 at 10:30:02AM +0530, Vishnu Reddy wrote:
> On Glymur, firmware interprets the value written to CPU_CS_SCIACMDARG3 as
> the number of virtual machines (VMs) and internally adds 1 to it. Writing
> 1 causes firmware to treat it as 2 VMs. Since only one VM is required,
> remove this write to leave the register at its reset value of 0. This does
> not affect other platforms as only Glymur firmware uses this register,
> earlier platform firmwares ignore it.
> 
> Fixes: abf5bac63f68a ("media: iris: implement the boot sequence of the firmware")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Vishnu Reddy <busanna.reddy@xxxxxxxxxxxxxxxx>

If this is a fix, should be the first patch in the series., so that it
can be applied independently.

> ---
>  drivers/media/platform/qcom/iris/iris_vpu_common.c | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/drivers/media/platform/qcom/iris/iris_vpu_common.c b/drivers/media/platform/qcom/iris/iris_vpu_common.c
> index 548e5f1727fd..bfd1e762c38e 100644
> --- a/drivers/media/platform/qcom/iris/iris_vpu_common.c
> +++ b/drivers/media/platform/qcom/iris/iris_vpu_common.c
> @@ -78,7 +78,6 @@ int iris_vpu_boot_firmware(struct iris_core *core)
>  	iris_vpu_setup_ucregion_memory_map(core);
>  
>  	writel(ctrl_init, core->reg_base + CTRL_INIT);
> -	writel(0x1, core->reg_base + CPU_CS_SCIACMDARG3);
>  
>  	while (!ctrl_status && count < max_tries) {
>  		ctrl_status = readl(core->reg_base + CTRL_STATUS);
> 
> -- 
> 2.34.1
> 

-- 
-Mukesh Ojha