Re: [PATCH v4 05/13] dt-bindings: mfd: s2mps11: add documentation for S2MU005 PMIC

[Rob Herring (Arm)]

On Tue, 14 Apr 2026 12:02:57 +0530, Kaustabh Chakraborty wrote:
> Samsung's S2MU005 PMIC includes subdevices for a charger, an MUIC (Micro
> USB Interface Controller), and flash and RGB LED controllers.
> 
> Since regulators are not supported by this device, unmark this property
> as required and instead set this in a per-device basis for ones which
> need it.
> 
> Add the compatible and documentation for the S2MU005 PMIC. Also, add an
> example for nodes for supported sub-devices, i.e. charger, extcon,
> flash, and rgb.
> 
> Signed-off-by: Kaustabh Chakraborty <kauschluss@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/mfd/samsung,s2mps11.yaml   | 121 ++++++++++++++++++++-
>  1 file changed, 120 insertions(+), 1 deletion(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/mfd/samsung,s2mps11.example.dts:241.29-39: Warning (reg_format): /example-2/i2c/pmic@3d/extcon/port/endpoint@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/mfd/samsung,s2mps11.example.dts:246.29-39: Warning (reg_format): /example-2/i2c/pmic@3d/extcon/port/endpoint@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/mfd/samsung,s2mps11.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/mfd/samsung,s2mps11.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/mfd/samsung,s2mps11.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/mfd/samsung,s2mps11.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/mfd/samsung,s2mps11.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/mfd/samsung,s2mps11.example.dts:240.53-243.27: Warning (avoid_default_addr_size): /example-2/i2c/pmic@3d/extcon/port/endpoint@0: Relying on default #address-cells value
Documentation/devicetree/bindings/mfd/samsung,s2mps11.example.dts:240.53-243.27: Warning (avoid_default_addr_size): /example-2/i2c/pmic@3d/extcon/port/endpoint@0: Relying on default #size-cells value
Documentation/devicetree/bindings/mfd/samsung,s2mps11.example.dts:245.49-248.27: Warning (avoid_default_addr_size): /example-2/i2c/pmic@3d/extcon/port/endpoint@1: Relying on default #address-cells value
Documentation/devicetree/bindings/mfd/samsung,s2mps11.example.dts:245.49-248.27: Warning (avoid_default_addr_size): /example-2/i2c/pmic@3d/extcon/port/endpoint@1: Relying on default #size-cells value
Documentation/devicetree/bindings/mfd/samsung,s2mps11.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'
Documentation/devicetree/bindings/mfd/samsung,s2mps11.example.dts:240.53-243.27: Warning (graph_endpoint): /example-2/i2c/pmic@3d/extcon/port/endpoint@0: graph node '#address-cells' is -1, must be 1
Documentation/devicetree/bindings/mfd/samsung,s2mps11.example.dts:240.53-243.27: Warning (graph_endpoint): /example-2/i2c/pmic@3d/extcon/port/endpoint@0: graph node '#size-cells' is -1, must be 0
Documentation/devicetree/bindings/mfd/samsung,s2mps11.example.dts:245.49-248.27: Warning (graph_endpoint): /example-2/i2c/pmic@3d/extcon/port/endpoint@1: graph node '#address-cells' is -1, must be 1
Documentation/devicetree/bindings/mfd/samsung,s2mps11.example.dts:245.49-248.27: Warning (graph_endpoint): /example-2/i2c/pmic@3d/extcon/port/endpoint@1: graph node '#size-cells' is -1, must be 0

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20260414-s2mu005-pmic-v4-5-7fe7480577e6@xxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.